Space Quest I may be run under Microsoft Windows 3.0
on a 386 or higher in enhanced mode through a DOS
shell. Multitasking and task swapping are not 
supported. For further technical assistance, please
refer to your Windows manual.

 Roland MT-32 and LAPC users:

 If you are set up for stereo sound panning (the 
movement of sound from one side to the other) may 
be backwards.
 The solution is to reverse the Right and
Left cables leaving your Roland device and entering
your amplification device (stereo, amplified
speakers, etc.).
 The midi specification for stereo panning calls
for midi controller number 10 values 0 - 127 to
operate from LEFT to RIGHT. The MT-32 and LAPC
devices were engineered to work from RIGHT to LEFT.
 If we were to compensate for this it would effect 
all other midi devices, causing them to pan incorrectly. 
We elected to follow the midi specification for 
this reason.

NOTE: When dealing with electronic devices, we 
recommend that you make cable connection changes 
with the power to each device switched OFF.