; ; $Revision: 1.3 $ ; $Date: 12 Oct 1989 8:47:04 $ ; ;*************************************************************************** ;* Copyright (C) 1988 by Phoenix Technologies Ltd. This program * ;* contains proprietary and confidential information. All rights reserved * ;* except as may be permitted by prior written consent. * ;*************************************************************************** ; sys0012.ADF ; This file contains the Hardware test features for the C&T280 chipset. AdapterId 0012h AdapterName " C&T Internal Features " NumBytes 0 NamedItem Cmos 42h ChipReg 8Eh Prompt "Processor clock speed" Choice "25 MHz 8Eh - 01XXXX10" pos[0]=01XXXX10b Choice "20 MHz 8Eh - 01XXXX01" pos[0]=01XXXX01b Choice "16 MHz 8Eh - 00XXXX00" pos[0]=00XXXX00b Help "Processor clock speed." NamedItem Cmos 42h ChipReg 8Eh Prompt "On board peripheral wait states" Choice "1 8Eh - 0XXX00XX" pos[0]=0XXX00XXb Choice "4 8Eh - 0XXX11XX" pos[0]=0XXX11XXb Choice "3 8Eh - 0XXX10XX" pos[0]=0XXX10XXb Choice "2 8Eh - 0XXX01XX" pos[0]=0XXX01XXb Help "Each wait state is 125ns at 16Mhz, 100ns at 20Mhz, and 120ns at 25Mhz for the CPU, DMA and Master cycles. This controls the wait states for accesses made to the Interrupt Controller, Real Time Clock, Keyboard Controller, Floppy Disk Controller, Serial Port, CMOS SRAM, and the Timer." NamedItem Cmos 48h ChipReg B9h CTMemSize Prompt "Memory size" Choice "1Mb (1-256) B9h - 100000XX" pos[0]=100000XXb Choice "2Mb (2-256) B9h - 101000XX" pos[0]=101000XXb Choice "3Mb (3-256) B9h - 101100XX" pos[0]=101100XXb Choice "4Mb (4-256) B9h - 101101XX" pos[0]=101101XXb Choice "6Mb (2-256/1-1MB) B9h - 101110XX" pos[0]=101110XXb Choice "10Mb (2-256/2-1MB) B9h - 101111XX" pos[0]=101111XXb Choice "5Mb (1-256/1-1MB) B9h - 011000XX" pos[0]=011000XXb Choice "4Mb (1-1MB) B9h - 110000XX" pos[0]=110000XXb Choice "8Mb (2-1MB) B9h - 111000XX" pos[0]=111000XXb Choice "12Mb (3-1MB) B9h - 111110XX" pos[0]=111110XXb Choice "16Mb (4-1MB) B9h - 111111XX" pos[0]=111111XXb Help "Select the number of 256Kb SIMMs and 1MB SIMMs on the board." NamedItem Cmos 48h ChipReg B9h Prompt "Number of -RAS precharge cycles" Choice "Disabled B9h - XXXXXX10" pos[0]=XXXXXX10b Choice "3 CPU CLK2 B9h - XXXXXX01" pos[0]=XXXXXX0Xb Choice "5 CPU CLK2 B9h - XXXXXX11" pos[0]=XXXXXX1Xb Help "When enabled this causes -RAS precharge during I/O or idle cycles." NamedItem Cmos 43h ChipReg 8Fh Prompt "Matched memory cycle" Choice "Default 8Fh - 00000XX0" pos[0]=00000XX0b Choice "Fast 8Fh - 00000XX1" pos[0]=00000XX1b Help "The Default (0) is 187.5ns cycles at 16Mhz, 200ns cycles at 20 and 25Mhz. When set to Fast, the cycles are 187.5ns at 16Mhz, 150ns at 20Mhz and 160 at 25Mhz." NamedItem Cmos 43h ChipReg 8Fh Prompt "Fast VGA cycle" Choice "Disabled 8Fh - 00000X0X" pos[0]=00000X0Xb Choice "Enabled 8Fh - 00000X1X" pos[0]=00000X1Xb Help "The fast VGA cycle may be extended by using CHRDY. The default is disabled." NamedItem Cmos 43h ChipReg 8Fh Prompt "Data Ready Extend" Choice "Enabled 8Fh - 000001XX" pos[0]=000001XXb Choice "Disabled 8Fh - 000000XX" pos[0]=000000XXb Help "When enabled, one wait state is inserted after the 82C321 samples CHRDY active. It provides extended data set-up time for read cycles only." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 00000h-1FFFFh is on" Choice "System Board B4h - XXXXXXX1" pos[0]=XXXXXXX1b Choice "I/O Channel B4h - XXXXXXX0" pos[0]=XXXXXXX0b Help "Select where the RAM at this address is located." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 20000h-3FFFFh is on" Choice "System Board B4h - XXXXXX1X" pos[0]=XXXXXX1Xb Choice "I/O Channel B4h - XXXXXX0X" pos[0]=XXXXXX0Xb Help "Select where the RAM at this address is located." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 40000h-5FFFFh is on" Choice "System Board B4h - XXXXX1XX" pos[0]=XXXXX1XXb Choice "I/O Channel B4h - XXXXX0XX" pos[0]=XXXXX0XXb Help "Select where the RAM at this address is located." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 60000h-7FFFFh is on" Choice "System Board B4h - XXXX1XXX" pos[0]=XXXX1XXXb Choice "I/O Channel B4h - XXXX0XXX" pos[0]=XXXX0XXXb Help "Select where the RAM at this address is located." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 80000h-9FFFFh is on" Choice "System Board B4h - XXX1XXXX" pos[0]=XXX1XXXXb Choice "I/O Channel B4h - XXX0XXXX" pos[0]=XXX0XXXXb Help "Select where the RAM at this address is located." NamedItem Cmos 45h ChipReg B5h Prompt "Enable Shadow RAM at C0000h-CFFFFh" Choice "RAM enabled B5h - XX1XXXXX" pos[0]=XX1XXXXXb Choice "ROM enabled B5h - XX0XXXXX" pos[0]=XX0XXXXXb Help "Select whether Shadow RAM at C0000h-CFFFFh will be in ROM or RAM." NamedItem Cmos 45h ChipReg B5h Prompt "Write Protect RAM at C0000h-CFFFFh" Choice "Write enabled B5h - 0XXXXXXX" pos[0]=0XXXXXXXb Choice "Write disabled B5h - 1XXXXXXX" pos[0]=1XXXXXXXb Help "Select whether to write enable or write disable at B5h-0XXXXXXX." NamedItem Cmos 45h ChipReg B5h Prompt "Enable Shadow RAM at D0000h-DFFFFh" Choice "RAM enabled B5h - XXX1XXXX" pos[0]=XXX1XXXXb Choice "ROM enabled B5h - XXX0XXXX" pos[0]=XXX0XXXXb Help "Select whether Shadow RAM at D0000h-DFFFFh will be in ROM or RAM." NamedItem Cmos 45h ChipReg B5h Prompt "Write Protect RAM at D0000h-DFFFFh" Choice "Write enabled B5h - X0XXXXXX" pos[0]=X0XXXXXXb Choice "Write disabled B5h - X1XXXXXX" pos[0]=X1XXXXXXb Help "Select whether to write enable or write disable at B5h-0XXXXXXX." NamedItem Cmos 49h ChipReg BAh Prompt "DRAM write access wait states" Choice "1 BAh - XX1XXXXX" pos[0]=XX1XXXXXb Choice "0 BAh - XX0XXXXX" pos[0]=XX0XXXXXb Help "Select the number of DRAM write access wait states." NamedItem Cmos 49h ChipReg BAh Prompt "DRAM read access wait states" Choice "1 BAh - X1XXXXXX" pos[0]=X1XXXXXXb Choice "0 BAh - X0XXXXXX" pos[0]=X0XXXXXXb Help "Select the number of DRAM read access wait states." NamedItem Cmos 49h ChipReg BAh Prompt "Page/Interleaved Mode" Choice "Enabled BAh - 1XXXXXXX" pos[0]=1XXXXXXXb Choice "Disabled BAh - 0XXXXXXX" pos[0]=0XXXXXXXb Help "Select 'Enabled' if you wish to have page/interleaved mode." NamedItem Cmos 4Ah ChipReg BBh Prompt "MRDY during MASTER/CPU/DMA cycles" Choice "Enable BBh - XXXXX100" pos[0]=XXXXX100b Choice "Disable BBh - XXXXX000" pos[0]=XXXXX000b Help "Select 'Enable' if you wish to have MRDY during RAM cycles." NamedItem Cmos 4Ah ChipReg BBh Prompt "Internal delay line usage" Choice "Enable BBh - XXXX1X00" pos[0]=XXXX1X00b Choice "Disable BBh - XXXX0X00" pos[0]=XXXX0X00b Help "Select 'Enable' if you wish to have internal delay line usage." NamedItem Cmos 4Ah ChipReg BBh Prompt "RAS hold time in DMA/MASTER cycles" Choice "2 clk2 BBh - XX00XX00" pos[0]=XX00XX00b Choice "2.5 clk2 BBh - XX01XX00" pos[0]=XX01XX00b Choice "3 clk2 BBh - XX10XX00" pos[0]=XX10XX00b Choice "3.5 clk2 BBh - XX11XX00" pos[0]=XX11XX00b Help "Select the RAS hold time in DMA/MASTER cycles." NamedItem Cmos 4Ah ChipReg BBh Prompt "MRDY during refresh" Choice "Enable BBh - X1XXXX00" pos[0]=X1XXXX00b Choice "Disable BBh - X0XXXX00" pos[0]=X0XXXX00b Help "Select 'Enable' if you wish to have MRDY during refresh." NamedItem Cmos 4Ah ChipReg BBh Prompt "Column address to CAS delay" Choice "1 clk2 BBh - 1XXXXX00" pos[0]=1XXXXX00b Choice ".5 clk2 BBh - 0XXXXX00" pos[0]=0XXXXX00b Help "Select the column address to CAS delay." NamedItem Cmos 4Eh ChipReg BFh Prompt "Page mode RAS time-out counter" Choice "Disabled BFh - XXXXX0XX" pos[0]=XXXXX0XXb Choice "Enabled BFh - XXXXX1XX" pos[0]=XXXXX1XXb Help "Select 'Enabled' if you wish to have a page mode RAS time-out counter." NamedItem Cmos 49h ChipReg BAh Prompt "EMS memory access wait states" Choice "1 BAh - XXXX1XXX" pos[0]=XXXX1XXXb Choice "0 BAh - XXXX0XXX" pos[0]=XXXX0XXXb Help "One wait state at 16Mhz is 125ns, at 20Mhz 100ns, and at 25Mhz 120ns." NamedItem Cmos 49h ChipReg BAh Prompt "EMS enable" Choice "Off BAh - XXX0XXXX" pos[0]=XXX0XXXXb Choice "On BAh - XXX1XXXX" pos[0]=XXX1XXXXb Help "EMS is disabled if set at off, else EMS is enabled." NamedItem Cmos 4Bh ChipReg BCh Prompt "EMS page register I/O base address" Choice "208h BCh - XXXX0000" pos[0]=XXXX0000b io 208h-209h Choice "218h BCh - XXXX0001" pos[0]=XXXX0001b io 218h-219h Choice "258h BCh - XXXX0101" pos[0]=XXXX0101b io 258h-259h Choice "268h BCh - XXXX0110" pos[0]=XXXX0110b io 268h-269h Choice "2A8h BCh - XXXX1010" pos[0]=XXXX1010b io 2A8h-2A9h Choice "2B8h BCh - XXXX1011" pos[0]=XXXX1011b io 2B8h-2B9h Choice "2E8h BCh - XXXX1110" pos[0]=XXXX1110b io 2E8h-2E9h Help "Select the EMS page register I/O base address." NamedItem Cmos 4Bh ChipReg BCh Prompt "EMS Base Address" Choice "C0000h-CC000h BCh - 0000XXXX" pos[0]=0000XXXXb mem 0C0000h-0CC000h Choice "C4000h-D0000h BCh - 0001XXXX" pos[0]=0001XXXXb mem 0C4000h-0D0000h Choice "C8000h-D4000h BCh - 0010XXXX" pos[0]=0010XXXXb mem 0C8000h-0D4000h Choice "CC000h-D8000h BCh - 0011XXXX" pos[0]=0011XXXXb mem 0CC000h-0D8000h Choice "D0000h-DC000h BCh - 0100XXXX" pos[0]=0100XXXXb mem 0D0000h-0DC000h Choice "D4000h-E0000h BCh - 0101XXXX" pos[0]=0101XXXXb mem 0D4000h-0E0000h Choice "D8000h-E4000h BCh - 0110XXXX" pos[0]=0110XXXXb mem 0D8000h-0E4000h Choice "DC000h-E8000h BCh - 0111XXXX" pos[0]=0111XXXXb mem 0DC000h-0E8000h Choice "E0000h-EC000h BCh - 1000XXXX" pos[0]=1000XXXXb mem 0E0000h-0EC000h Help "Select the EMS Base Address." NamedItem Cmos 4Fh ChipReg BFh Prompt "EMS memory space" Choice "1 Mb to top BFh - 0000XXXX" pos[0]=0000XXXXb Choice "1 Mb to top BFh - 0001XXXX" pos[0]=0001XXXXb Choice "2 Mb to top BFh - 0010XXXX" pos[0]=0010XXXXb Choice "3 Mb to top BFh - 0011XXXX" pos[0]=0011XXXXb Choice "4 Mb to top BFh - 0100XXXX" pos[0]=0100XXXXb Choice "5 Mb to top BFh - 0101XXXX" pos[0]=0101XXXXb Choice "6 Mb to top BFh - 0110XXXX" pos[0]=0110XXXXb Choice "7 Mb to top BFh - 0111XXXX" pos[0]=0111XXXXb Choice "8 Mb to top BFh - 1000XXXX" pos[0]=1000XXXXb Choice "9 Mb to top BFh - 1001XXXX" pos[0]=1001XXXXb Choice "10 Mb to top BFh - 1010XXXX" pos[0]=1010XXXXb Choice "11 Mb to top BFh - 1011XXXX" pos[0]=1011XXXXb Choice "12 Mb to top BFh - 1100XXXX" pos[0]=1100XXXXb Choice "13 Mb to top BFh - 1101XXXX" pos[0]=1101XXXXb Choice "14 Mb to top BFh - 1110XXXX" pos[0]=1110XXXXb Choice "15 Mb to top BFh - 1111XXXX" pos[0]=1111XXXXb Help "Top of memory is no more than 16Mb." NamedItem Cmos 42h ChipReg 8Eh Prompt "Math Ready control" Choice "82C321 8Eh - XX00XXXX" pos[0]=XX00XXXXb Choice "NDP 8Eh - XX10XXXX" pos[0]=XX10XXXXb Help "If set to NDP then the 80387 generates the Math Ready. If set to 82C321, the 82C321 generates the Math Ready signal."