********************************************************************** ADDITIONAL NOTES ABOUT USING MWAVE IN Windows 95 or Windows 3.x (c) 1996, IBM Corp. 9:03 a.m., April 8, 1997 ********************************************************************** -------------------- INTRODUCTION -------------------- This document provides information to help you properly run Mwave appli- cations in Microsoft Windows 95 or Windows 3.x. A list of "frequently- asked questions" (FAQs) presents answers to questions or problems you may encounter while working with the Mwave product. Other topics include sol- utions to compatibility issues and installation problems, as well as additional technical notes. ------------------------- Windows 95 Compatibility ------------------------- Mwave has been tested and proven compatible with Microsoft Windows 95. For additional compatibility information, refer to section 4.0 below. ----------------------- Printing This Document ----------------------- To print this document from: o Windows 95--Highlight the document in Windows Explorer and choose the Print command from the File menu. o Windows 3.x--Choose the Print command from the File menu. ------------------------ Other Helpful Documents ------------------------ The following online document provides additional information about Mwave Windows applications: MWHELP.HLP This help file presents a general overview of all the components in Mwave. To view this file: from Windows 95, click Start, point to Programs, Mwave, and click Mwave Help; from Windows 3.x, go to the Mwave Program group and click the Mwave Help icon. ====================================================================== CONTENTS ====================================================================== 1.0 BEFORE YOU CALL FOR HELP 2.0 INSTALLATION NOTES 2.1 Installing Mwave for Windows 95 2.2 Installing MIDI Samples for Windows 95 2.3 Configuration Conflicts with IBM Network Adapters 2.4 Turning Mwave OFF and ON in DOS 2.5 Selective Uninstall of Mwave Features in Windows 95 3.0 FREQUENTLY-ASKED QUESTIONS (FAQs) 3.1 FAQs about the Mwave Modem 3.2 FAQs about Mwave FAX Capabilities 3.3 FAQs about Mwave's Speaker Phone Capabilities 3.4 FAQs about Mwave Audio Features 3.5 FAQs about Mwave's Telephone Country Selection Utility 3.6 FAQs about Mwave's Sound Blaster Emulation 3.7 FAQs about Mwave and Loading Windows 3.x or Windows 95 4.0 COMPATIBILITY 4.1 Communications (Modem) Applications 4.2 Windows FAX Applications 4.3 DOS FAX Applications 4.4 Memory Problems with Windows and DOS TSRs 4.5 Other Applications and Mwave 5.0 OTHER TECHNICAL NOTES 5.1 Recommendations for Optimum Mwave Modem Performance 5.2 Audio/MIDI Technical Notes 5.3 Sound Blaster Technical Notes 5.4 Notes about the Mwave Modem 5.5 Notes about DOS Mode Support 5.6 Notes about Windows 95 Games ====================================================================== 1.0 BEFORE YOU CALL FOR HELP ====================================================================== Before you call the technical support group, please read this entire doc- ument for any installation, configuration, or compatibility information. Also, the FAQs provide a good basis for answering most common questions. If the document does not provide a solution and you need to contact tech- nical support, please have your computer running. For faster service, have the following information ready for our technical support personnel: o Make and model of your computer o Mwave software version number o Names and version numbers of application software you are running o Contents of your \WINDOWS\DOSSTART.BAT, AUTOEXEC.BAT, and CONFIG.SYS files (You can either print the files, or have access to an editor to view them.) ====================================================================== 2.0 INSTALLATION NOTES ====================================================================== No installation errors have been reported. Please contact Product Support if you encounter a problem during installation of the Mwave product. ---------------------------------------------------------------------- 2.1 Installing Mwave for Windows 95 ---------------------------------------------------------------------- INITIAL INSTALLATION OF MWAVE CARD AND SOFTWARE 1. Before installing this software, please shut down all open programs. 2. To begin installation put disk #1 in the diskette drive. 3. Click the START icon at the bottom of the screen. 4. Click RUN and type A:\SETUP in the text entry box. Click OK, the Mwave code installation begins. Follow the install instructions. Please note, if the install detects a previous version of the Mwave drivers, it will uninstall them first. This process may take a lot of time with no apparent system activity. Do not be alarmed, this is normal. After the old MWave drivers have been uninstalled, remove the diskette, reboot the system and return to step 2. 5. After the install completes open the Control Panel and click ADD NEW HARDWARE. a. Click NEXT. b. Click NO and click NEXT. c. Select ?OTHER devices in the "Hardware Types" menu. d. Click NEXT. e. Locate "IBM" in the "Manufacturers" list. f. In the "Models" list select IBM Dolphin Mwave DSP Adapter. g. Click NEXT. h. Click NEXT again. i. Click OK and the "Insert Diskette" dialog box appears. j. Put Mwave disk #1 in the diskette drive. k. Enter A:\ l. Click OK. m. Click FINISH. n. Click YES to shut down your computer. o. Turn your computer back on. p. Windows 95 now discovers new hardware. q. Click OK in the dialog box to shut down your computer. r. Shut down Windows 95 and power off your computer. s. Restart the computer and Mwave is installed. 6. Continue to section 2.2 to install the MIDI software. ---------------------------------------------------------------------- 2.2 Installing MIDI Samples for Windows 95 ---------------------------------------------------------------------- To install the Mwave MIDI Samples: 1. Close all open programs. 2. Insert disk 1 of the MIDI Samples in your floppy drive. 3. Click Start 4. Click Run 5. Type a:\setup in the OPEN window 6. Click OK 7. Choose the path in which to install the samples. We recommend using the default path. 8. You will be asked if you want your DOS MWave MIDI Synthesizer to use this set of MIDI samples. Click Yes. 9. You will be asked if you want the Windows MWave MIDI Synthesizer to use this set of MIDI samples. Click Yes. 10. You will be asked the same question as in step 8. Answer Yes again. 11. As the install progresses, you will be prompted to insert diskettes 2 and 3. Do this when prompted. Click OK to continue. 12. When the installation is complete, you will see a box reminding you to restart you system. Click OK. 13. Shut down and restart your system. ---------------------------------------------------------------------- 2.3 Configuration Conflicts with IBM Network Adapters ---------------------------------------------------------------------- When you install the Reference Adapter in a personal computer (PC) using Windows 3.x that contains an IBM Token-Ring Network Adapter, an IBM Ethernet Adapter, or both, system resource conflicts may occur. System resource conflicts may prevent you from booting the PC and will result in error messages and/or a black screen. To correct this problem: 1. Power off the PC and insert a DOS boot diskette in the diskette drive. Then power on the PC. 2. Change the directory to the following: - for Windows 3.x or DOS, CD X:\MWW\UTILS (Where X is the drive where Mwave is installed.) 3. Type MWCONFIG and press Enter. The Hardware Configuration Utility appears. 4. Configure the IRQs such that no IRQ is set to 10, and click Update to save the changes. 5. Power down the PC and remove the DOS boot diskette. Then power on again. ---------------------------------------------------------------------- 2.4 Turning Mwave OFF and ON in DOS ---------------------------------------------------------------------- NOTE: The following section applies when you shutdown or boot to: - Native DOS only from Windows 3.x - MS-DOS mode only from Windows 95 If you are running Mwave under DOS only, type the following commands from the DOS prompt: o MWAVE OFF--To turn Mwave off o MWAVE START--To re-initialize Mwave and begin a fresh session without rebooting o MWAVE ON--To restart Mwave with the same settings as the previous session o FASTCFG--To change application types If you use MWAVE OFF to stop Mwave and then use FASTCFG to restart Mwave, you must change the application type. ---------------------------------------------------------------------- 2.5 Selective Uninstall of Mwave Features in Windows 95 ---------------------------------------------------------------------- To use a different audio, modem, or Sound Blaster card than provided by Mwave, you must uninstall the Mwave feature before installing the substi- tute card. To uninstall Mwave features, perform the following steps: o Click START o Point to SETTINGS o Click Control Panel o Double-click System o Click the Device Manager tab o Click the "Plus" sign next to the device you want to uninstall o Click on the device o Click Properties o Click on the check next to "Original Configuration (Current)" in the Device Usage box. This disables the device. o Click OK o Click Close o Reboot the system NOTE: To reinstall the device, simple replace the check in the Device Usage box. ====================================================================== 3.0 FREQUENTLY-ASKED QUESTIONS (FAQs) ====================================================================== This section contains answers to questions about certain features and capabilities provided by Mwave applications. ---------------------------------------------------------------------- 3.1 FAQs about the Mwave Modem ---------------------------------------------------------------------- Q: What should I do if I answer an incoming phone call with the handset and then discover that the call is a fax or modem transmission? A: Fax machines and modems are usually set up to call back several times if they fail to make a connection. Therefore, hang up and, when the fax machine or modem calls back, allow the PC to answer the call. Mwave enables the PC to discriminate (determine the call type) and either pass the call to the open fax or modem application, or take a message for a voice call. Q: What is the transmission speed for Mwave Voice Over Data? A: Mwave Voice Over Data is limited to 14.4 kbps. Q: Why don't I hear modem sounds when I run the Microsoft Hardware Compatibility Test (MHCT) for the modem? A: The MHCT tests the modem's M2 command. M2 is the command to keep the speakers on all the time. Mwave's DSP maps the M2 command to M1, which commands no sound when the modem is connected. Therefore, no sound is heard when tested. Q: Why am I unable to telegame from a Windows 95 DOS session? A: Telegaming in a Windows 95 DOS session requires a limited modem speed of 14.4 kbps (V.32) and the modem default speed is 28.8 kbps. To enable telegaming within a DOS session, set the modem speed to 14.4 kbps. To change the modem speed: o Open the Mwave Modem. o Click Options. o Click Settings. o Select 14400 (V.32 bis). o Click OK. NOTE: If the options in the Settings window are greyed-out, your modem is connected; it must be disconnected for you to change the modem speed. Q: What settings do I need to use when I install a communications appli- cation (such as ProComm or CrossTalk)? A: Your communications software requires that you provide a modem type, a baud rate (i.e, the speed of your modem), and the COM port to which the modem is attached. The chart below describes settings required by Mwave: To set this... Select highest ranking available setting... ------------------------------------------------------------------- The Modem type 1. Mwave modem 2. Generic Hayes-type modem 3. User-defined modem 4. Hayes SmartModem 2400 5. Hayes modem 6. Hayes compatible modem 7. Other (Note: If you select a modem of type "Other," you must include the proper modem initialization string. For most applications, the initialization string "AT&F" will work. See the Mwave Modem online help for more information.) Baud Rate 57,600 bps, or the maximum setting offered by your communications software. COM Port COM 1 (If your mouse is assigned this port, use COM 2.) Q: What can I do if my 300 baud modem connections are unreliable? A: Use the next higher setting (or baud rate) and try again. It is recom- mended that you use the highest possible setting of your Mwave Modem. Q: What port speed should I use when I connect my modem at 2400 bps? A: If you attempt to force the modem to connect at 2400 bps by setting the port speed to that value, the connection may not be made or it may fall back to 2400 nECL or 1200. To avoid this problem, set the port speed to a higher value. Q: What host application transfer protocol is recommended for best Mwave Modem performance? A: For best throughput when sending or receiving data, select the highest-ranking available transfer protocol listed here. 1. ZMODEM 2. Kermit 3. Ymodem-G 4. TEXT 5. ASCII 6. XMODEM (only as a last resort) For more information, see Section 5.1 Recommendations for Optimum Mwave Modem Performance. ---------------------------------------------------------------------- 3.2 FAQs about Mwave FAX Capabilities ---------------------------------------------------------------------- Q: What setting should I use for the "fax/modem type" when I set up my Class 2 FAX software to work with Mwave if "Mwave Modem" isn't listed as an option? A: For all FAX applications, if "Mwave Modem" is not listed, select "Generic Class 2" or some comparable label from the application's list of supported fax/modems. Q: What should I do if I answer an incoming phone call with the handset and then discover that the call is a fax or modem transmission? A: See first Q & A in the above section, FAQs About the Mwave Modem. Q: What are Mwave's fax restrictions? A: Mwave supports fax transmissions of monochrome text and images up to 8 1/2 inches wide (A4 width). Mwave does not support B4 width trans- missions. ---------------------------------------------------------------------- 3.3 FAQs about Mwave's Speaker Phone Capabilities ---------------------------------------------------------------------- Q: How do I prevent the speaker phone from terminating a telephone call when my computer is set to automatically suspend after a period of time with no keyboard activity? A: To avoid having your telephone calls terminated when your computer uses the Suspend/Resume Power Management feature, double-click the Power icon in the Setup group Start/Settings/Control Panel to choose a setup that does not include activation of the suspend mode when you don't use the mouse or keyboard. Q: When the Phoenix Message Center records an incoming call, how do I prevent it from appending a dial tone to the end of the message? A: The Phoenix Message Center's answering system requests that each caller ends his/her message by pressing the "#" key before hanging up. The calls you receive with "appended dial tones" occur when the caller does not press #. ---------------------------------------------------------------------- 3.4 FAQs about Mwave Audio Features ---------------------------------------------------------------------- Q: Why can't I play a compact disc through Windows 95's "My Computer"? A: Windows 95 must have its CD Player installed before you can play CDs through My Computer. To make sure the Windows 95 CD Player is loaded: 1. Select Settings from the Start menu, then select Control Panel. 2. Double-click the Add/Remove Program icon. 3. Select the Windows Setup tab. 4. Select Multimedia. 5. Select the CD Player check box, then click OK. Q: Why don't I hear any sound when playing a MIDI file with Windows 95's Media Player? A: You won't hear any sound when playing a MIDI file if your MIDI drivers have not been configured for Mwave. To make sure that Mwave is prop- erly configured: 1. Select Settings from the Start menu. 2. Select the Control Panel. 3. Select Multimedia. From the multimedia screen, select "MIDI". Select "Single instrument" and highlight "Mwave MIDI Synthesizer". Q: Why do I receive an error message when I try to play an Mwave Synthesizer Samples .WAV file in a Wave audio application? A: The Mwave Synthesizer uses samples in the form of *.WAV files installed on the hard disk to play music. These WAV files are intended solely for use by the synthesizer and are formatted correctly for this purpose. However, if for some reason a user tries to use an audio application to play the *.WAV files individually, the applica- tion may respond with an error message. This does not indicate a problem in using the files for their intended purpose. Q: Why doesn't the sound playback when I make a mono recording? A: Mono recordings often record on only one stereo channel. Therefore, make sure the balance sliders are at the center setting when recording and replaying. Q: What should I do when I receive a "WinDAT error" when I try to play or record a .WAV file through AudioStation? A: The AudioStation Mixer cannot handle Wave (.WAV) files. You can use the Windows 95 Media Player for Wave playback or Windows 95's Sound Recorder for both playback and record. Q: How can I prevent the noise in my 8 bit recordings? A: An 8 bit recording is naturally noisy. To reduce the noise level of your recording, use 16 bit recording. Q: How do I get Sound Blaster games to run after a suspend/resume when it has been running with MIDI? A: Stopping MIDI will not enable Sound Blaster games to run correctly. Instead, close and then reopen the Sound Blaster application. Q: Sound Blaster games run after a suspend/resume but my Telephone Answering Machine (TAM) cannot receive calls. How do I reactivate the TAM? A: Close and then reopen the Sound Blaster application. Q: How do I restore the sound to games such as DOOM or DOOM II running in a Windows 95 DOS session after a suspend/resume? A: Close and then reopen the game application. Q: How do I control the sound in DOS games such as DOOM and Descent? A: The Windows 95's Volume Control application controls the games sound levels when played from a DOS session in Windows 95. When Mwave is configured for Sound Blaster, control the volume with the AUX MIDI Volume Control slider. When configured for General MIDI, both the Master Volume and MIDI Play Out sliders control the volume. When playing these games from native DOS, the sounds must be controlled through the game application. Q: How do I enable both Sound Blaster music and sounds in games such as DOOM II telegaming in Windows 95 DOS-mode? A: You must change the Mwave modem setting to V.32bis (14,400). To change the setting: 1. Click START 2. Point to PROGRAMS and then MWAVE 3. Click Mwave Modem 4. Click OPTIONS on the menu bar and then SETTINGS... 5. Click 14400 (V.32bis) 6. Click OK Q: Why am I unable to telegame? A: When audio mixer options are selected, they consume the DSP resources necessary to telegame, even when the mixer is off. Therefore, to enable telegaming you must disable the mixer options such as Effects and Qsound. Q: Why do I hear pauses when I play an audio wave (.WAV) recording from a floppy diskette? A: These pauses during playback occur due to the slower rate of data transfer from the diskette. To fix the problem, copy the wave (.WAV) file to your hard disk. Q: Why does my .WAV file I just recorded sound "broken"? A: "Broken" or discontinuous sound is often the result of either the slower data transfer rate from a floppy drive, or you recorded the .WAV file to a drive that is compressed (using compression programs such as DriveSpace, DoubleSpace, or Stacker). In both cases, the play- back application cannot receive data fast enough and, as a result, you hear the gaps in the transaction. To fix this problem, you can: o Record the .WAV file to a fixed disk (i.e., C: ). o Lower the record rate to 22 KHz or 11 KHz, change to 8 bit, and/or change to mono sound. Most applications allow you to adjust these parameters, and less taxing record rates may solve the problem. o If you use a disk compression program (such as DriveSpace, DoubleSpace, or Stacker), direct the recorded data to an uncom- pressed drive. This way, the computer can process the sound without taking the time to uncompress/compress the information. Refer to Section 5.2 Audio/MIDI Technical Notes for additional tech- nical information. Q: Why don't I hear sounds from my game or CD when the Mwave Modem is also running? A: Mwave manages the workload of the digital signal processor, the device that allows you to play sound, use telephony, etc. If you don't hear sounds from your DOS game or CD, it is likely that Mwave is using the modem to send a file or has set the modem to answer the telephone. Wait for these other tasks to finish. You should then hear the sounds from your game or CD. Q: Why does the volume on 8 bit recordings seem softer than 16 bit recordings? A: Most prerecorded 8 bit wave files, like those included with applica- tions or Windows, are compressed to improve their signal-to-noise (S/N) ratio. These compressed files are much louder than the uncom- pressed audio (wave, synthesizers, MPEG) in the system. To compensate for loud prerecorded 8 bit audio, Mwave tasks reduce the playback level of all 8 bit recordings. The volume reduction is done with 16 bit precision, so the S/N ratio is NOT reduced. The reduced and compressed 8 bit audio plays slightly louder than typical uncom- pressed 16 bit audio, and slightly reduces the volume of uncompressed 8 bit audio. Q: What happens if I change the input source of the mixer during recording? A: Changing the input source results in muting of the audio. If you inad- vertently do this, restart Windows to recover. Q: How do I stop feedback from occurring when I use my microphone? A: Lower the peak levels for playback and record for your microphone. 1. From the Windows 95 Start menu, select Programs-->Mwave-->Audio Control. 2. Select the MIC button. 3. Click and drag the microphone (MIC) slide controls to a lower level. 4. Resume using the microphone. (Note: When the play pushbutton is selected, make sure that the microphone check box is not selected.) ---------------------------------------------------------------------- 3.5 FAQs about Mwave's Telephone Country Selection Utility ---------------------------------------------------------------------- Q: What is Country Selection? A: The Mwave Telephone Country Selection program is used to set country specific parameters for Mwave telephony functions including Modem, FAX, speakerphone, and Telephone Answering Machine. The Mwave tele- phony drivers use the Country selection information to permit reliable and safe connection to the appropriate telephone network. ********** WARNING: Improper selection of the telephone network may cause ********** unreliable operation. ---------------------------------------------------------------------- 3.6 FAQs about Mwave's Sound Blaster Emulation ---------------------------------------------------------------------- Q: What sound card does Mwave emulate? A: Mwave emulates both a Sound Blaster 1.5 (SB) card and a Sound Blaster Pro (SB Pro) card. See additional information in Section 5.3 Sound Blaster Technical Notes in this file. ---------------------------------------------------------------------- 3.7 FAQs about Mwave and Loading Windows 3.x or Windows 95 ---------------------------------------------------------------------- Q: Why can't I open Windows after receiving the following message: "Mwave Warning: Mwave has detected a memory condition that may adversely effect Windows operation. Windows will not be started. Restarting your machine may solve this problem. If this message displays again, read \MWW\README.TXT" A: This message typically calls attention to memory resources used by Mwave and DOS "terminate and stay resident" (TSR) programs, such as DOSKEY. To avoid the warning message and start Windows, you can: o Make sure that Mwave is loaded after the TSRs by verifying that the "CALL MWAVE START" statement in your AUTOEXEC.BAT file follows all calls to load TSR programs. In addition, the "CALL MWAVE START" statement must precede the lines that call HWCHECK and PS1START.BAT. For Windows 3.x: o Restart your PC if you invoke a TSR before you launch Windows. o Modify the MWW\MWAVE.INI file to start regardless of the TSRs you have loaded in memory. Add the line WINSTART=YES to the {MWAVE} section of MWAVE.INI. (Note: If you choose this option, Windows will lose the use of this extended memory which may affect per- formance.) For additional information on the memory error condition message you receive when starting Windows, see Section 4.4 Memory Problems with Windows and DOS TSRs. ====================================================================== 4.0 COMPATIBILITY ====================================================================== Read through this section if you have any problems with a specific appli- cation working with Mwave. ---------------------------------------------------------------------- 4.1 Communications (Modem) Applications ---------------------------------------------------------------------- o Connecting to Prodigy When attempting to use the Mwave Modem to connect to Prodigy using a 2400 bps Y (Tymnet) connection, the connection fails. Contact Prodigy support for assistance in solving this problem. o Microsoft Mail 3.2 Microsoft Mail 3.2 fails to connect when using the Mwave modem. The suggested fix from Microsoft is to add the line "exclusive=0" under the {SFSremote} heading in \WINDOWS\MSMAIL.INI. o Windows for Workgroups 3.11 The Remote Access Support (RAS) doesn't recognize the connected response from the Mwave modem. The IBM Personal Computer Company (PCC) Bulletin Board Service (BBS) provides a MODEM.INF file with the correct Mwave information. You should obtain this file and add the information to the \WINDOWS\SYSTEM\MODEM.INF file. o Windows for Workgroups (WFW) and Communications Applications in Windows 3.x Some communications applications hang on the second attempt to use the COM port. This condition occurs because the SERIAL.386 driver provided with WFW 3.11 does not properly handle UART First In--First Out (FIFO) capabilities. To fix this problem, obtain the WG1001.EXE fix from Microsoft. (You may also find this file on the IBM ThinkPad Forum on CompuServe.) In some cases, you may need to replace WFW's \WINDOWS\SYSTEM\COMM.DRV with COMM.DRV from Windows 3.1 to completely solve the problem. ---------------------------------------------------------------------- 4.2 Windows FAX Applications ---------------------------------------------------------------------- Mwave Class 1 Fax has been tested and proven compatible with the fol- lowing Windows Fax applications: o Microsoft Exchange o Delrina's WinFax Pro version 7.0 Mwave Class 2 Fax is compatible with the following Windows Fax applica- tions: o Delrina's WinFax Lite version 3.0 and WinFax Pro version 3.0 o Delrina's WinFax Pro version 4.0 o BIT Software's BitFax Pro version 3.07 o Cheyenne's Bitware Lite version 3.22 o Trio's Data/Fax Lite version 4.1E o Trio's Data/Fax o Microsoft's Exchange (Windows 95 Fax) version 4.0.410.59 o Phoenix Technologies' Eclipse Fax version 6.0 o Hayes's SmartCom Fax version 1.01B o Smith Micro's QuickLink version II 1.4.3 o Smith Micro's QuickLink Gold version 1.2 o Sofnet's FaxWorks Pro version 3.0 The following applications are not currently compatible with Mwave Class 2 Fax: o Hayes's SmartCom Data/Fax Pro version 1.0A o BIT Software's BitFax for Windows version 2.09D o Datastorm's ProComm Plus for Windows Fax version 2.00 o Datastorm's ProComm Plus for Windows versions 2.10 and 2.11 o Microsoft's Windows for Workgroups Fax version 3.11 o Delrina's WinFax Lite version 2.0 The following items provide specific information about the fax applica- tions mentioned above. o Delrina's WinFax Pro version 4.0 If you are installing WinFax Pro 4.0 as a new application, you may encounter the following questions and error messages. Under Windows 95, installation may stop and inform you of the detection of a Windows desktop other than "program." You will be instructed to exit Windows and use "program" instead. Do NOT discon- tinue the installation. Select "Continue" and proceed. You will also be given the opportunity to change the COM driver and FIFO parameters. Select "No" when asked if you want the system to make these changes to the \WINDOWS\SYSTEM.INI file. The WinFax Pro 4.0 installation prompts you to test the Fax modem. - If you select "Yes," the message "Unable to communicate with fax/modem - unknown device" appears. - Select "No" and continue. - From the Fax/Modem Setup screen: 1. Set the modem type to Class2 2. Select the proper COM port 3. Do not change the initialization strings - The message "Setup cannot communicate with the fax device con- nected to your COM port. Do you want to continue?" appears. - Select "Yes." - When asked if you want to make \WINDOWS\SYSTEM.INI file changes, select "No." The Mwave Fax modem is now properly installed. o Phoenix Technologies' Eclipse Fax version 6.0 Using an editor (such as Notepad), modify the {MODEM} section of the \WINDOWS\E-FAX.INI file by changing "Priority FAX=1" to "Priority FAX=0" When you exit Eclipse, there is a short delay and the message "The Modem is not responding" appears. Ignore this message. o Hayes's SmartCom Fax version 1.01B You must select the PCMCIA 144/144 FAX modem in the Utilities/Hardware configuration dialog box to use Mwave with this application. o Smith Micro's QuickLink II 1.4.3 and QuickLink Gold 1.2 The main QuickLink application panel must be displayed in order to receive a Fax. o Sofnet's FaxWorks Pro version 3.0 Using an editor (such as Notepad), modify the {MODEM} section of the \WINDOWS\FAXWORKS.INI file by changing "Priority FAX=1" to "Priority FAX=0" When you exit FaxWorks, there is a short delay and the message "Modem not responding" appears. Ignore this message. General Usage Note: Many Fax applications offer a custom communications (COM) driver that may improve Fax transmission speeds. Mwave uses the Windows default COM driver when testing these applications. If a tested application does not perform, verify that the Windows default COM driver statement, "comm.drv=comm.drv", is in the {boot} section of the \WINDOWS\SYSTEM.INI file. (NOTE: You can use an editor such as Notepad.) Problems may occur because an applications COM driver is not compatible with other applications. In addition, some applications will not give you the opportunity to change a non-default COM driver, regardless of compatibility. ---------------------------------------------------------------------- 4.3 DOS FAX Applications ---------------------------------------------------------------------- Mwave Class 2 fax is compatible with the following DOS Fax applications: o Delrina's DOS Fax Lite version 3.0 o Delrina's DOS Fax Pro version 2.0 o Cheyenne's BitFax version 4.05A The following items provide specific information about the fax applica- tions mentioned above. o Delrina's DOS Fax Pro version 2.0 The Mwave modem must be running before initializing and using DOS Fax Pro. NOTE: The Terminate and Stay Resident Programs (TSRs), added to the AUTOEXEC.BAT by Delrina's DOS Fax Pro installation, can cause con- flicts in Mwave's ability to send and receive faxes. o Cheyenne's BitFax version 4.05A Each time you start BitFax, send a fax before attempting to receive faxes. This ensures that BitFax can receive Class 2 faxes from the Mwave modem. Delrina's DOS Fax Lite version 2.00 is not currently compatible with Mwave Class 2 Fax. ---------------------------------------------------------------------- 4.4 Memory Problems with Windows and DOS TSRs ---------------------------------------------------------------------- Loading programs such as DOS TSRs (e.g. DOSKEY) in memory after Mwave loads may result in a memory error condition and prevent Windows from starting. There are three ways you can get past the message and start Windows. o To start Windows in most general purpose situations: Load Mwave last, after all other items, for it to function properly. Check the contents of your AUTOEXEC.BAT file to make sure Mwave loads last: 1. Open the AUTOEXEC.BAT file with an editor. 2. Verify that "CALL MWAVE START" follows all calls to TSR programs. Also, make sure "CALL MWAVE START" precedes the statements that call HWCHECK and PS1START.BAT. 3. Restart your computer. o To start Windows after invoking or using a DOS TSR: If you invoke certain programs (such as TSRs) in DOS before you start Windows, you may encounter memory errors. To avoid these memory prob- lems, you must restart your PC before launching Windows. o To override the problem and start Windows without unloading TSRs: In some situations, you may want to continue with Windows while the TSRs consume memory resources. If your PC has more than 8 MB of RAM, this should not pose a problem. If your PC has less than 8 MB of RAM, you may experience slower performance from Windows. In Windows 3.x you can bypass this memory condition by modifying the \MWW\MWAVE.INI file. To accomplish this: 1. Open \MWW\MWAVE.INI in an editor. 2. Add the parameter WINSTART=YES in the {MWAVE} section. 3. Restart Windows. (Note: Windows may lose the use of extended memory if it loads while TSRs are present, which negatively affects Windows performance. Make sure that you consider this possibility before editing the .INI.) ---------------------------------------------------------------------- 4.5 Other Applications and Mwave ---------------------------------------------------------------------- o Lotus Notes 3.x Lotus Notes 3.x does not properly recognize the Mwave modem. Lotus does not include an .MDM file that describes the Mwave commands and responses. To fix this problem, obtain a copy of the MWAVE.MDM file from the PCC BBS and add it to the \NOTES directory. Follow these steps: 1. Start Lotus Notes 3.x. 2. Select the modem configuration. The list of choices should now include the Mwave modem. 3. Choose the Mwave modem from the list. 4. Return to Notes and use as you usually would. o Windows 95 Volume Control The Mwave Audio Control and the Windows 95 Volume Control applica- tions are not synchronized. Using both controls simultaneously results in incorrect settings. In order to avoid this situation, operate only one audio controller. Microsoft is investigating this Windows 95 device driver problem. o Windows 95 Phone Dialer In order to talk through Windows 95's Phone Dialer with Mwave, you must attach a handset via the splitter plug (shipped with the Mwave adapter). ====================================================================== 5.0 OTHER TECHNICAL NOTES ====================================================================== This section provides additional technical information and support for specific uses of Mwave functions and/or applications. ---------------------------------------------------------------------- 5.1 Recommendations for Optimum Mwave Modem Performance ---------------------------------------------------------------------- IBM recommends the following settings or conditions for best performance from your Mwave Modem: o For best throughput when sending or receiving data, select the highest-ranking available transfer protocol listed here. 1. ZMODEM 2. Kermit 3. Ymodem-G 4. TEXT 5. ASCII 6. XMODEM (only as a last resort) o If you are operating in Windows 3.x, try to ensure that your communi- cation application fully utilizes the First In--First Out (FIFO) capabilities provided by Mwave. Specifically, the application should fill the FIFO six (6) or more characters per interrupt during transmit. o You should enable Hardware Flow Control. Use the Hayes command AT\Q3. o Select a modem protocol from this list, with (1) providing the best performance, and (6) giving the worst. Protocol AT Commands use to get protocol ------------------------------------------------------------ 1. V.42 / V.42bis AT\n7"H3 2. MNP 1-4 / V.42bis AT\n3"H3 3. MNP 1-4 / MNP5 AT\n3"H0 4. V42 AT\n7"H0 5. MNP1-4 AT\n3%C0"H0 6. Non-error corrected AT\n0 Refer to the online help available in Mwave Modem for explanation of the AT commands required to use one of the above modem protocols. o Trouble Connecting at 28.8 kbps If you experience difficulties connecting at a modem speed of 28.8 kbps to a particular number, or if you have trouble connecting to a particular modem rotary, try the following. - If the connection is not made and the speaker is OFF: 1. Disable V.42 bis and MNP 5 using AT"H%C 2. Disable V.42 (AT\N3) or MNP 1-4 (AT\N5). You could also disable both with AT\N. - If the connection is not made and the speaker remains on: 1. Reduce the maximum modem throughput using the AT commands ATS28=18 (for 26400 bps), ATS28=17 (24000 bps), ATS28=16 (21600 bps), or ATS28=15 (19200 bps). 2. If you've tried step 1 and it still does not connect, use AT*TH8 to control the speed. Once you connect using the AT*TH8 command, remember to reset your modem using either AT&F (for factory defaults) or AT*TH4. If you forget to reset, your next calls will transmit at lower V.34 connection rates. ---------------------------------------------------------------------- 5.2 Audio/MIDI Technical Notes ---------------------------------------------------------------------- o Additional Memory Requirement for Complete MIDI Sample Set in Windows 3.x The Mwave internal sampled sound synthesizer comes equipped with a complete General MIDI sample set. Depending on how extensively this capability is used, up to 3 MBytes of memory may be required. Here are some tips which may improve MIDI performance: - Remove all RAM disks from your AUTOEXEC.BAT. - Remove SMARTDRV from your AUTOEXEC.BAT or reduce the amount of memory allocated to the SMARTDRV cache. The line in your AUTOEXEC.BAT should be: C:\WINDOWS\SMARTDRV.EXE 256 0 - Use the standard VGA video driver for Windows. Run Windows System Setup from the Main Program Group, select Options and Change System Settings, then select the VGA Display driver. o Recording Audio Successful recording of audio Wave (.WAV) files depends on a variety of factors including processor speed, amount of free disk space, data fragmentation on the hard disk, and the type of application used. Some computers, particularly those with slower processors, either "hang" the system or produce recordings with gaps. These conditions occur when using high data rates, such as 44 KHz, which means the computer cannot keep up with the data transfer. If you attempt to record 44 KHz 16 bit stereo Wave files using a slower PC, you may encounter problems. Here are some tips that may improve recording: - Erase unnecessary files from your hard disk. - Lower the record rate to 22 KHz or 11 KHz, change to 8 bit, and/or change to mono sound. Most applications allow you to adjust these parameters. - Use a Hard Disk Defragmentation program (usually included with Norton Utilities or Central Point PCTools) to create more contig- uous space on your drive. This keeps the slower PC from having to work too hard (and take too much time) looking for available disk space. NOTE: You can use the Disk Defragmentation utility. Windows 95 includes this utility under Start/Programs/Accessories/System Tools/Disk Defragmenter. - If you use a disk compression program (such as DriveSpace, DoubleSpace, or Stacker), direct the recorded data to the tempo- rary drive created by the compression program or to an uncom- pressed drive. Again, the computer then can process the sound without taking the time to uncompress/compress the information. NOTE: Windows 95 users can find additional information on the disk com- pression program DriveSpace under Start/Help/Index/DriveSpace. DOS users can find additional information on the disk compression program DoubleSpace: DOS 6.x users must type HELP DBLSPACE at the DOS prompt, and IBM DOS 7.0 users type HELP STACKER at the DOS prompt. - Use an alternative audio recording application. Audio programs use a variety of techniques to record and playback sound. Some may work well in situations where others fail to perform. For a basic test, try recording with the Windows Sound Recorder. ---------------------------------------------------------------------- 5.3 Sound Blaster Technical Notes ---------------------------------------------------------------------- The "SET BLASTER=" Command A few games require that DOS uses an environment variable to identify the location of the sound hardware. For such games, the following line is added to the AUTOEXEC.BAT file during installation: SET BLASTER=A220 I5 D1 This parameter... Tells your game to... ----------------- -------------------------------------------- A220 locate the sound hardware at address 220 I5 use interrupt level 5 D1 use DMA channel 1 These are the default settings created during the installation of Mwave. If you change these settings after installing a new peripheral card, the "SET BLASTER=..." line must be changed accordingly. ---------------------------------------------------------------------- 5.4 Notes about the Mwave Modem ---------------------------------------------------------------------- o CONFIG.SYS and the Mwave Modem Certain configurations of memory managers defined in CONFIG.SYS may cause the system to "hang" when loading the DOS modem. This condition typically occurs when a memory manager tries to manage upper memory and "DOS=UMB" is not set. The solution is to always have DOS check for an upper memory manager by including DOS=UMB in the CONFIG.SYS file. If DOS uses no memory manager, this option has no effect. The DOS Mwave installation auto- matically adds this line to your CONFIG.SYS file. o V.23/Minitel Modem Connection Mwave supports V.23 for modem connection to the Minitel network in France only. V.23 is NOT supported in other countries. To use V.23 with your modem application, issue the following AT commands: - AT+MS=3 to start a V.23 session - AT&F to end your V.23 session In order to use V.23, you must set your communications application to the following settings: - 7 bit even parity - 1 stop bit When you start a V.23 modem session, you are limited to V.23 modem calls. However, Mwave still responds with the highest response speed, up to V.34. ---------------------------------------------------------------------- 5.5 Notes about DOS Mode Support ---------------------------------------------------------------------- Windows 95 does not support Mwave functions if you attempt to access the Startup Menu by pressing F8 during bootup and then selecting the Command Prompt Only option. Windows 95 supports normal Mwave DOS functions (games, modem, class 2 fax) while in MS-DOS mode or in a Windows 95 DOS session. ---------------------------------------------------------------------- 5.6 Notes about Windows 95 Games ---------------------------------------------------------------------- If you are playing games that are made by Humongous and experience no sound you will need to go to the Windows Mixer and un-mute the Wave Phone Mute button. When you are done playing the game re-mute the Wave Phone Mute button. If you are playing games from Electronic Arts( NHL 97, Triple Play 97 ect...) you may experience blank screen between events lasting 30 to 40 seconds. This has been observed on machines that use the SIS 6205 video chipset. If you are playing a game called Diablo from Blizzard and experience no sound you will need to download and install the patch from the Diablo bulletin board.