ThinkPad 770X November 18, 1998 Installation Package for Windows NT Version 1.00 This self-extracting zip file contains the following files: tp770xnt.txt These installation instructions license.txt License Agreement diskhelp.txt Text file giving instructions and limitations on building these diskettes images. acpcw32a.exe ACP Modem II Driver (v2.50) Disk 1 of 2 acpcw32b.exe ACP Modem II Driver (v2.50) Disk 2 of 2 aftprwnt.exe Audio Driver Diskette (v1.91) uttpfdos.exe Utility Diskette for DOS (v4.13) irtpgwnt.exe Infrared Driver Diskette (v1.12) pctpcwnt.exe CardSoft PCMCIA Driver (v3.10.04k) tracptw1.exe TrackPoint Driver (v1.10) uttpf7xx.exe Utility Data Diskette (v1.01) uttpfide.exe IDE Driver Diskette (v1.00) uttpfwnt.exe Utility Diskette (v4.13) vftpdwnt.exe Video Features Diskette (v1.21) vctpcwnt.exe Video Capture Driver (v2.03) mptpcwnt.exe MPEG Driver Diskette (v1.47) NOTE: + Please visit the Device Driver File Matrix at the following URL to obtain the latest driver updates: http://www.pc.ibm.com/us/support/thinkpad/tpopsys.html + For previous versions of the System Program Service Diskette (BIOS), please visit the IBM FTP server web page at: http://www.pc.ibm.com/us/searchfiles.html (do a search on SYTPD) + If you plan on using your system outside the United States or Canada, and you have a internal ACP Modem, you will need to download the Modem Country Update Diskette, MODEMCUW. Please see the Device Driver File Matrix for latest version. EXTRACTION INSTRUCTIONS: - Download this file to a temporary directory on your hard drive. - Execute the file, TP770NT.EXE, to extract all the files listed above. - You will need 13 diskettes to build all the drivers. INSTALLATION INSTRUCTIONS: ------------------------- This document contains information to assist you with the installation of Windows NT Workstation version 4.0 on the IBM ThinkPad 770X. These instructions make the following assumptions: - No additional hardware connected to the system, i.e. external mouse, keyboard, docking stations, pcmcia cards, etc. - No Network Card connected to the system. ( Can be added later. These instructions do not tell how to setup/configure network cards.) - That you have Backed up your software and personal data files on the hard disk. NOTE: DVD MOVIE PLAY BACK IS **NOT** SUPPORTED UNDER WINDOWS NT! INSTALLING WINDOWS NT 4.0 WORKSTATION 1. Read the Windows NT installation guide. - If you plan to use OS/2 Warp with Windows NT, you need to use the OS/2 Warp Boot Manager. For more information, read Installing IBM OS/2 in the Online User's Guide. You can install Windows NT using the internal CD-ROM drive or an externally attached CD-ROM drive. However, if your computer does not have a CD-ROM drive, or if a port replicator is not available, use one of the following two alternative ways to install Windows NT: A.) Using an external CD-ROM drive in a DOS environment If you have an external CD-ROM drive that connects under a DOS environment, you can install Windows NT in DOS: 1. Insert the Windows NT compact disc in the external CD-ROM drive. 2. Go to the CD-ROM directory; then go to the \I386 directory. For example, if your CD-ROM drive is drive D, go to D:\I386 3. At the command prompt, type WINNT; then press Enter. For example, D:\I386>winnt 4. Follow the instructions on the screen. B.) Using a network server You can install Windows NT on multiple computers by first copying the Windows NT master source files to a shared drive on a network server. After connecting your computer to a network, such as with the DOS LAN requester, you can install the files from the network server to your computer at the DOS command prompt. 2.) Boot off the three NT boot diskettes or, if you have the internal CDROM drive set to bootable, boot off the NT CDROM. Note: DO NOT use diskettes made during the installation of NT on another machine! 3.) At the Windows NT Workstation Setup window, you will be given a list of options. To continue with the installation, press Enter. 4.) At the next window, it states that it will automatically detect floppy controllers and hard drives. Press Enter to continue. 5.) It will then say that it has detected the following device: IDE CD-ROM /PCI IDE Controller. Press Enter to continue. 6.) Read through the licensing agreement (use the PAGE DOWN key to read the entire agreement). When finished you are prompted to hit the F8 key to agree or ESC if you do not agree. If you agree, press the F8 key to continue. 7.) It will then give you a list of hardware and software components: Computer: Standard PC Display: Auto Detect Keyboard: XT, AT, or Enhanced Keyboard <83-104 keys> Keyboard Layout: US Pointing Device: Microsoft Mouse Port Mouse Make sure No Changes: The above list matches my computer is highlighted and press Enter to continue. 8.) It will then show the existing partitions on your hard drive. Make sure the drive you want to install Windows NT on is highlighted (if you only have one partition then there will only be one drive to select) and press Enter. 9.) It will then prompt you to select the type of file system you want to install on the hard drive. You have the following options: Format the partition using the FAT file system Format the partition using the NTFS file system Convert the partition to NTFS Leave the current file system intact Select one of the options above and press Enter to continue (if you are installing Windows NT on top of your current operating system, then you will want to select one of the last two options. Select NTFS only if your current operating system supports NTFS, which Windows 95 and 98 do not). If you selected one of the first two options, it will warn you that formatting your hard drive will erase all data on your hard drive. If you wish to continue, press F to format the hard drive. If you selected to convert the partition to NTFS it will give you a warning that the drive will be inaccessible to any operating system other than Windows NT. If you wish to continue press C. 10.) If you selected to format the partition, you will be prompted for the installation location after the formatting has completed. To accept the default location, press Enter. If you chose to convert the partition to NTFS, the installation will continue and the conversion will take place on the first boot of Windows NT. 11.) It will then say that it will examine your hard drive. Press Enter to continue. After it has examined your hard drive (it may take several minutes) it will begin copying files to the hard drive. 12.) After it has finished copying files, remove the diskette from the floppy drive and press Enter to restart the computer. 13.) At the Windows NT Workstation Setup window, click on Next to continue. 14.) You will then be given a list of setup options. Select Portable and then click on Next to continue. 15.) Enter you name and organization and then click on Next to continue. 16.) Enter in the CD Key (this is provided with your Windows NT 4.0 Workstation software) and then click on Next to continue. 17.) Enter in a computer name to identify your computer on a network. After entering it, click Next to continue. 18.) Enter a password for the Administrator account. After entering the password and confirming it, click Next to continue. 19.) It will then ask if you wish to create an Emergency Repair disk. Make sure that Yes is selected and then click on Next. 20.) It will then ask which component you would like to install. To accept the default, click Next. 21.) Click Next . It will then prompt you as to how this computer will participate on a network. Click on Do not connect this computer to a network at this time and then click on Next to continue. Click on Finish to complete setup. Note: The networking components may be added later from the Network icon in Control Panel. When you are ready install networking support, please make sure the drivers for your network adapter are available and that you have all the required information about your network. 22.) At the Date/Time Properties windows, select the appropriate time zone, check the date and time and then click on Close. 23.) At the Detected Display window, click on OK to continue. At the Display Properties window, click OK. The installation program will then begin copying files to the hard drive. 24.) It will prompt you to label a blank floppy disk as the Emergency Repair Disk and then to insert it into the floppy drive. Do so and then click on OK. 25.) After it is complete, remove the diskette from the floppy drive and click on Restart Computer. 26.) At the Begin Logon window, press the CTRL+ALT+DEL key to logon. Type in your Administrator password and click on OK and you are ready to use Windows NT 4.0 Workstation. 27.) Please follow the instructions below, in the order given, for the installation of the ThinkPad Device Drivers: INSTALLING THE THINKPAD UTILITY PROGRAM FOR WINDOWS NT ------------------------------------------------------ The Windows NT ThinkPad Utility Program is design to configure the ThinkPad (in a similar manner to the Windows 95 Device Manager). This program allows for hardware configuration, displays remaining battery life, and controls suspend/resume. 1.) Insert the ThinkPad Utility Program Diskette for Windows NT into the diskette drive. Make sure you are logged on with a user id authorized as a local administrator. 2.) Click on Start, then Run, and type in a:\setup and then click on OK. 3.) At the Install window, click on OK. 4.) It will then prompt you where you want install the drivers. To accept the default, click on OK. Note: Only a short name can be specified for a target directory, i.e., do not place in a directory with spaces, or with a directory name greater than 8 characters. 5.) You are then prompted for which options you wish to install. You can install the ThinkPad Features and/or the Personalization Editor (this will require the ThinkPad Utility Diskette for DOS). Click on the Personalization Editor to remove the check mark (you can rerun this program to install it later if you wish). Click on Install. 6.) After the installation is complete, click on OK. INSTALLING THE VIDEO FEATURES DISKETTE FOR WINDOWS NT ----------------------------------------------------- 1.) Click on Start, then Settings, and then Control Panel. 2.) Double-click on Display. 3.) Click on the Settings tab and then on Display Type near the bottom of the window. 4.) Under Adapter Type it should list VGA compatible display adapter. Click on Change. 5.) In the Change Display window, click on Have Disk. 6.) Insert the Video Features Diskette for Windows NT into the diskette drive. In the dialog box type a:\ and then click on OK. 7.) Highlight "Trident Video Accelerator 3D Cyber 9397" and then click OK. 8.) It then prompts you if you are sure you want to install the driver. Click on Yes. 9.) After the drivers are installed click on OK. Then click on Close in the Display Type window. 10.) Click on Close in the Display Properties window. 11.) It then prompts you that the system needs to be restarted for the changes to take effect. Remove the diskette from the floppy drive and click on OK. 12.) Click on Cancel in the Display Type window and then click OK in the Display Properties windows. 13.) It will ask if you want to restart the computer. Click on Yes. 12.) After the computer has restarted, it will tell you that a new graphics driver has been installed. Click on OK. In the Display Properties window, under Desktop Area, move the slider until it says 1024x768 pixels. Click on Apply. It will tell you that you have not successfully tested these settings. To continue, click on OK. Windows NT should now fill the entire screen area. Click on OK to close the Display Properties window. INSTALLING THE PCI-IDE DRIVER ----------------------------- 1.) Select Start, then Settings, then Control Panel. 2.) Select SCSI Adapters. 3.) From the SCSI Adapters window select the Drivers tab, then select Add... to add a new driver. 4.) Insert ThinkPad IDE Driver Diskette into diskette drive and click on Have Disk.... 5.) The system will beep with the Install from Disk window. Type in a:\ in the dialog box and then click on OK. 6.) Highlight ThinkPad PIIX4 IDE Driver then select OK. It will then prompt you to enter the path to the drivers. Type in a:\ in the dialog box and then click on Continue. 7.) Once the installation is complete, restart the computer for the changes to take effect. INSTALLING THE AUTIO SUPPORT SOFTWARE FOR WINDOWS NT ---------------------------------------------------- 1.) Click on Start, then Settings, and then Control Panel. 2.) Double-click on Multimedia. 3.) Click on the Devices tab and then click on Add at the bottom of the window. Select Unlisted or Updated Driver and then click on OK. 4.) Insert the Audio Support Diskette for Windows NT into the diskette drive. In the dialog box, it prompts you for the location of the drivers. Type in a:\ and then click on OK. 5.) Highlight CrystalWare Audio Driver and then click on OK. 6.) After the installation is complete, it will prompt you that you need to restart the computer. Remove the diskette from the floppy drive and click on Restart Now. INSTALLING THE TRACKPOINT4 DEVICE DRIVER FOR WINDOWS NT ------------------------------------------------------- 1.) Click on Start, then Settings and Control Panel. 2.) Double-click on the Mouse icon. 3.) Select the General tab at the top of the Mouse Properties window. 4.) Click on Change. 5.) Insert the TrackPoint4 Device Driver diskette and then click on Have disk. 6.) Type in a:\ in the dialog box and the click on OK. 7.) Select PS/2 TrackPoint from the list. 8.) Click on OK. 9.) Click on Close in the Mouse Properties window. 10.) When prompted if you want to restart the computer, remove the diskette and click on Yes. ************************************************************************ ************************************************************************ INSTALLING SERVICE PACK 3 FOR WINDOWS NT If you are going to install Service Pack 3 for Windows NT, install it BEFORE the following drivers: + PC Card Support Software + ThinkPad Modem Software + Infrared Device Driver for Windows NT. If you subsequently reapply the service pack, you may have to reinstall these drivers. To install the service pack, follow the instructions in the readme included with the service pack. ************************************************************************ ************************************************************************ INSTALLING THE PC CARD SUPPORT SOFTWARE FOR WINDOWS NT ------------------------------------------------------ Note: If you have installed any PCMCIA adapters in the system, please shut down Windows NT, remove any PCMCIA cards, and restart before installing this software. 1.) You must be logged onto Windows NT as an administrator. 2.) Insert the CardWizard for Windows NT diskette in the diskette drive. 3.) Click on Start, then Run and type a:\setup and click on OK. 4.) At the CardWizard for Windows NT Setup window, click on Next. 5.) At the Welcome window, click on Next. 6.) At the Question window, it prompts you to remove any PC cards before continuing installation. After ensuring that there are no PC cards in the computer, click on Yes to continue. 7.) Next you are prompted as to where you want to install the drivers. To accept the default, click on Next. 8.) When it has finished the installation, it will prompt you as to whether you want to restart the computer. Yes is selected by default. Remove the diskette from the drive and click Finish. IMPORTANT: PRECAUTIONS MUST BE TAKEN BEFORE INSTALLING OR REAPPLYING SERVICE PACK 3 OR HIGHER FOR WINDOWS NT AFTER CARDWIZARD HAS BEEN INSTALLED. FAILURE TO FOLLOW THESE INSTRUCTIONS AND INSTALLING SP3 OR HIGHER AFTER INSTALLING THE CARDWIZARD SOFTWARE WILL CAUSE THE SYSTEM TO FAIL TO BOOT. INSTALLING THE THINKPAD MODEM SOFTWARE FOR WINDOWS NT ----------------------------------------------------- Note: Not all models came with a builtin ACP modem. Follow these instructions ONLY if your computer came with a built in ACP modem. Before installing the software on your ThinkPad, make sure that the DSP is enabled. Do this by: 1. From the Windows NT Start menu, choose Programs-->ThinkPad-->ThinkPad Configuration. 2. Click the Modem button. Verify that the modem is enabled. If not, click the Enable radio button. 3. Choose the OK button. 4. Exit Windows NT and restart your computer in order for the changes to take effect. To run the software under Windows NT, your computer must have a minimum of 24 MB of RAM. Follow these steps to install the modem software: 1.) Insert the ThinkPad Modem driver diskette #1 into the diskette drive. 2.) Click on Start, then Run and type a:\setup in the dialog box and then click on OK. 3.) At the Modem Setup Window, click on Continue. 4.) It will then ask where you want to install the drivers. Click on Continue to accept the default. 5.) When prompted, insert the second diskette and then click on OK. 6.) After it has finished installing the drivers, it suggests viewing the readme file for information on setting up COM ports under Windows NT. Click on OK to continue. 7.) It will then prompt you if you want to restart now or later. Remove the diskette from the diskette drive and click on Restart now. NOTE: Non-U.S. users must run the Country Selection program in the ThinkPad Modem window after the ThinkPad modem installation is complete. Restart the computer after you run Country Selection. After installing, you will need to set up the modem to work with Windows NT. (Windows NT does not provide a way for the installation program to do this for you automatically.) To setup the modem, you will need to do the following. Once you have completed these procedures, you should be able to use your modem with all modem communication applications supported by the version of Windows NT that you are using. Complete the following procedure in order to use communications applications such as HyperTerminal and Dial-Up Networking that use the Unimodem facility of Window NT 4.0. 1. From the Windows NT Start menu, choose Settings-->Control Panel. 2. Double-click the Modems icon. If no modem is installed, the Install New Modem dialog appears. If you already have a modem installed (not the ACP internal modem), choose the Add button to open the Install New Modem dialog. 3. Choose the Next button. Windows NT starts searching for the modem. When successful, it reports that it has found a modem of type "ThinkPad Data Fax Modem." 4. Choose the Next button and follow the remaining on-line instructions. NOTE: If Windows NT fails to detect a modem, verify that you configured your communications port correctly, and then repeat the above procedure. Remember that the changes you make when configuring the communications port do not take effect until you restart Windows NT. INSTALLING INFRARED DEVICE DRIVER --------------------------------- The Windows NT infrared device driver provides you IrDA 1.0 compliant functions, enabling infrared communication up to 115Kbps. 1.) Insert the Infrared Driver for Windows NT 4.0 into the diskette drive. 2.) Start Windows NT, and log on with the user ID authorized as an administrator. 3.) Click on Start and Run... 4.) Type A:\INSTALL and press Enter. 5.) Restart the computer. To enable the infrared port as COM 1, use the ThinkPad Configuration program. The following features are optional and are not required for Windows NT to function. Only install the following drivers if your system has the built in DVD Enhanced Video Adapter card. Installing the Video Capture Driver for Windows NT -------------------------------------------------- 1.) Start Windows NT. 2.) Click on Start and move the cursor to Settings and Control Panel. Then double-click on the Multimedia icon. "Multimedia Properties" window appears. Notes: Before installing the video capture driver, you need to install the audio device driver. Before the installation, ensure that all applications that use the IBM MPEG-2 devices are closed. If you run Media Player, close the application. 3.) Click on the Devices tab. 4.) Click on Add. The "Add" window appears. 5.) From the list of drivers, select Unlisted or Updated Driver. 6.) Click on OK. The "Install Driver" window appears. 7.) Enter the drive letter "for example, A:" corresponding to the diskette drive containing the installation diskette. The "Add Unlisted or Updated Driver" window appears and the following device is in the window: "9397 Video Capture" 8.) Click on OK. The installation starts. After a few seconds, the "About Video Capture Driver" window appears. 9.) Click on OK. The window disappears and the "Multimedia Properties" window reappears again. 10.) Click on OK. INSTALLING THE MPEG-2 DRIVER FOR WINDOWS NT ------------------------------------------- The IBM MPEG-2 Multimedia Driver for Windows NT 4.0 enables playback for MPEG motion videos on your computer by using the Windows NT Media Player. Note1: Before installing the MPEG-2 Driver, you need to install the Video Feature Driver, Audio Feature, and ThinkPad Configuration program. Note2: DVD Movie Playback is **NOT** supported under Windows NT 1.) Start Windows NT. 2.) Close "Media Player" and video capture applications if they are open. 3.) If present, uninstall the existing MPEG driver. 4.) Insert the MPEG Feature Disk for Windows NT into the diskette drive. 5.) Click on Start, Settings, and click on Control Panel. 6.) Double-click on the Multimedia icon. The "Multimedia Properties" window appears. 7.) Click on the Devices tab. 8.) Click on Add. The "Add" window appears. 9.) From the list of drivers, select Unlisted or Updated Driver by double clicking on it. 10.) Click on OK. The "Install Driver" window appears. Enter the drive letter "for example, A:" corresponding to the drive containing the installation diskette. 11.) Click on OK. "Add Unlisted or Updated Driver" window appears and the following device is in the window: (MCI) IBM MPEG-2 Decoder 12.) Click on OK. The installation starts. After a few seconds, the "Installation" window appears. 13.) Click on OK. The window disappears and the "Multimedia Properties" window reappears. 14.) Click on OK. CHANGE HISTORY: v1.00 Created on November 19, 1998