7800 Family Manager Set for SCO UnixWare 3.2 and 4.2, and SCO UnixWare Openserver 5.0x V3.02.2 Adding BTLD at boot time. ------------------------- Installing the Driver When Installing SCO UNIX To install the alad/alad325 or blad/blad325 drivers at the same time you install SCO UNIX, follow the instructions below for the version of SCO UNIX you are installing. 1. At the "Boot:" prompt type "ahslink" 2. When asked for name of package, type "alad325" 3. After kernel loads but before it runs, "link" prompts you to insert "7800 Family Manager" diskette. NOTE: You will be notified that an existing aladinit driver already exists and asked which routine you wish to replace. Choose routine 25 to replace and continue with the installation. Adding BTLD after initial installation. --------------------------------------- If SCO UNIX is already up and running use the installpkg command to install the driver. The following terms are trademarks of the IBM Corporation in the United States and/or other countries: IBM The following terms are trademarks of other companies: TRADEMARK OWNER Adaptec Adaptec, Inc. SCO Santa Cruz Operations IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY RELATED PATENTS OR COPYRIGHTS. THIS DRIVER IS COPYRIGHTED BY INTERNATIONAL BUSINESS MACHINES CORPORATION. ALL APPROPRIATE RESTRICTIONS APPLY. =====================================================================================