World Circuit & Formula T1 A How to Guide. by Jeff Dinger Step 1: From the "Main Menu", go to the "Game Options Menu" and select "Control Method." Step 2: Once in the "Control Method Menu", higlight "Custom", by clicking on it with the arrow, and then go to "Edit Current Controls." Step 3: Select "Edit Joystick Axes: and do the following: Joystick A axes: Set to "NORMAL" Joystick B axes: Set to "EXCHANGED" Thottle and Brake on seperate axes: Set to "NO" Leave this area by selecting "Continue". Step 4: Select "Edit Steering Controls" and do the following: Device: "JOYSTICK A" Mode: "LINEAR" Leave this by selecting "Continue". Step 5: Select "Accelerate/Brake Controls" and do the following: Accerlation Device: "JOY B" and "STICK" Mode: "LINEAR" Braking Device: "JOY B" and "STICK" Mode: "LINEAR" Leave this area by selecting "Continue." Step 6: Select "Gear Change Ratios" and do the following: Change Up: "JOY A/FIRE 1" Change Down: "JOY A/FIRE 2" Step 7: Leave this menu by selecting "OK" Step 8: Select "(RE)-Calibrate Joystick(s)" and do the following: Highlight Joystick A ( "< >" (X-axis)) Highlight Joystick B ( "< >" (X-axis)) The game will then ask you to move Joystick A (The Steering wheel) to the left (press fire) and then to the right (press fire) and then to the center (press fire), the standard configuration. The game will then ask you to configure the pedals, to the left (which is the Brake Pedal), and press fire. To the Right (The Gas Pedal) and press fire. Then center, do not touch the pedals, and press fire. Once you've done this, you're ready to race..... * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright 1994 by Jeff Dinger, Spectrum Holybyte, Inc and MicroProse, Inc.