; ; 3Com Corporation ; Configuring the COMSLINK.CFG File ; ; The Intelligent Auto Installation configuration file (COMSLINK.CFG) lets you ; customize your Intelligent Auto installations. Each of the parameters are defined below. ; Read the option description for each parameter. ; KEYWORD DEFAULT VALUE DESCRIPTION ; ============= ============== ============================= WINDOWS_VERSION ; Option: [WFW311|WIN31X] ; ; Installs windows support for Netware ; networks on either Windows for ; Workgroups (if WFW311) or Windows 3.1x ; (if WIN31X). If this option is set then ; the WINDOWS_DIRECTORY option must also ; be set. If this option is not set then ; COMSLINK will setup a DOS client only. WINDOWS_DIRECTORY ; Option: Full path, including drive, of ; the windows system that COMSLINK will ; set up Netware support for. To us this ; option you MUST specify what type of ; windows you are running in that directory ; in the WINDOWS_VERSION option above. CREATE_LOG_FILE YES ; Option: [Yes|No] ; ; Creates the file C:\COMSLINK.LOG ; which contains information generated ; by COMSLINK. RUN_DIAGNOSTICS NO ; Option: [Yes|No] ; ; The Group 1 Diagnostic tests check ; the adapter's physical components ; and circuitry during the COMSLINK ; installation. AUTO_CONFIGURE YES ; Option: [Yes|No] ; ; Automatically configures the Media ; Type Setting. CONFIGURATION_FILE ; Option: Path & Name of a configuration ; file. ; This optional file configures the ; adapter with the parameters saved in a ; configuration file. ; (ex. C:\3C59X.SET). ; For more information or to create ; the configuration file, refer to the ; Configuration and Diagnostic Program. ; Note: For this option to be activated, ; type in the configuration file path & ; name, and set AUTO_CONFIGURE to YES. EDIT_CONFIG.SYS YES ; Option: [Yes|No] ; ; YES edits C:\CONFIG.SYS and saves ; the original file to C:\CONFIG.3CM. ; ; NO does not change C:\CONFIG.SYS. ; You need to manually edit the file. EDIT_AUTOEXEC.BAT YES ; Option: [Yes|No] ; ; YES edits C:\AUTOEXEC.BAT and saves ; the original file to C:\AUTOEXEC.3CM. ; ; NO does not change C:\AUTOEXEC.BAT. ; You need to manually edit the file. EDIT_NET.CFG YES ; Option: [Yes|No] ; ; YES edits NET.CFG and saves the ; original file to NET.3CM. ; ; NO does not change NET.CFG. You ; need to manually edit the file. SMARTAGENT_INFO YES ; Option: [Yes|No] ; ; Adds the Transcend SmartAgent section ; into the NET.CFG file. The Transcend ; SmartAgent software is already ; incorporated into the NetWare ODI ; driver. Adding the SmartAgent section ; into NET.CFG lets the management ; information be customized for ; each user. 3INSTALL_FRAME_TYPE ; Options: Ethernet_802.2 ; Ethernet_802.3 ; Ethernet_II ; Ethernet_SNAP ; ; Default = AutoDetects 802.2 & 802.3 ; ; This parameter defines the frame ; type that COMSLINK will use to connect ; to the 3INSTALL account on the server. ; If no value is specified, COMSLINK ; will first attempt to connect using ; Ethernet_802.2 and then Ethernet_802.3. TARGET_DIRECTORY C:\NWCLIENT ; Options: Any designated directory. ; ; COMSLINK searches C:\AUTOEXEC.BAT for ; an existing NetWare installation. ; If no existing NetWare installation is ; detected, COMSLINK copies the NetWare ; client software to the target ; directory. If COMSLINK finds an ; existing NetWare client installation, ; COMSLINK will install to that directory ; and this path will NOT be used. CONNECT_TO_SERVER YES ; Option: [Yes|No] ; ; YES connects COMSLINK to a server, and ; allows COMSLINK to detect the frame type. ; If COMSLINK finds a server, it looks for ; the file 3INSTALL.BAT in the LOGIN ; directory of the server. If COMSLINK finds ; the file 3INSTALL.BAT it spawns it. ; ; NO installs the NetWare client software from ; this diskette and does NOT look for a server. ; For information on the 3INSTALL.BAT file ; read: ; A:\COMSLINK\COMSLINK.TXT. PREFERRED_SERVER ; No Default ; ; Preferred server identifies which NetWare ; Server (2.x, 3.x or 4.x) has the ; 3INSTALL.BAT file. LOCATE_NIC YES ; Option: [Yes|No] ; ; YES forces COMSLINK to check if there is only ; one 3COM card in the system before attempting ; to install netware support or configure the card. ; If this option is set to NO then the card will ; be configured even if the AUTO_CONFIGURE option is ; set to yes ; %VER ETHER comslink.cfg v1.0c