
July 3rd 2023
ATOMOS - Cast App 1.0.1 Release Notes
For PC & Mac
About the ATOMOS – Cast App
The ATOMOS – Cast App for PC and Mac allows users to access all the features they're already familiar with from operating their CAST via its physical buttons and the Ninja's 5" touchscreen display while gaining access to some exciting new features exclusive to the App.
These new standout features include:
- AI-powered camera matching for each of the CAST's inputs.
- Ability to apply separate LUTs to each of the CAST's inputs.
- Uploading LUTs and Overlay graphics straight to the Ninja from your computer via USB-C.
System Requirements to run the ATOMOS – CAST App
- macOS 10.14 or later
- Windows 10 or later
- Minimum screen resolution: 1280 x 800
- USB 3.0 port (and high-speed USB cable)
- Ninja V/V+ attached to AtomX CAST running AtomOS 10.93.00.
Current limitations of the ATOMOS – Cast App
- After changing codecs or switching between playback and record mode, the CAST's USB Video output may not start in the App after pressing the Live button.
- If the Project frame rate is greater than 30 fps, ensure FPS conversion is enabled
- If the Project frame rate is less than 30 fps or if FPS conversion is already enabled, unplug and replug the USB cable to reinitialize the USB video stream.
- If unplugging/replugging the USB cable does not recover the video stream, power cycle the Ninja while USB is disconnected to resolve this issue.
- In Windows, the App may occasionally freeze after a cold/warm boot. Closing and reopening the App will usually resolve this issue.
- Closing and reopening the app will usually resolve this issue.
- If the primary input is interlaced and Zoom x2 monitor mode is enabled, changing the frame rate of the primary input may cause the Ninja display to become mirrored.
This issue is only known to affect certain Ninja V/V+'s.
- If yours is affected, tapping the Monitor icon on the unit returns the image display to its normal state.
More details on the ATOMOS – Cast App can be found on our FAQs or in our setup guide video on YouTube:
https://www.youtube.com/user/AtomosVideo
Download the ATOMOS – Cast App from here: https://www.atomos.com/product-support