Softpaq Solution:  SP0737
File Name:  P/N 181038-002
Title:  Windows 3.1 Display Support 
Version:  7.41 Rev A
_______________________________________________________________________

CATEGORY:  Drivers / Video

EFFECTIVE DATE:  15-Dec-1994

PRODUCTS AFFECTED:  All Compaq products

OPERATING SYSTEM:  MS DOS 5.0 or greater

SYSTEM CONFIGURATION:  Windows 3.1 or greater, Windows for Workgroups or Windows for Pen Computing versions 3.1 or higher.

SUPERSEDES:  SP0734 

DESCRIPTION: This Compaq Windows Display Support release provides display drivers to support Compaq display controller hardware features when used with Microsoft Windows 3.1 or higher.  CPQSETUP detects the hardware currently installed in your system and allows you to select the features you wish to install.  Features supported by the files in this release are:

- Compaq Windows Display Drivers
- Compaq Windows Display Driver Autoloader

The Display Drivers provide enhanced support for Compaq display controllers.

Additional information detailing controller and mode support is in the README.WIN file on Disk 1 of the Windows Support diskettes.

HOW TO USE:  

1.  After downloading the SoftPaq, copy it to an empty directory and change to that directory. 

If downloaded in zipped format (.ZIP), unzip the file to create an executable:  PKUNZIP SP0737

2.  From that drive and directory, execute the SoftPaq file to unbind the primary files:  SP0737 [ENTER]

The following files should be created: 

QRST5.EXE
18103XUS._01
18103XUS._02
SP0737.DOC

3.  Obtain 2 formatted 1.44 MB diskettes.

4.  To create the diskettes and upgrade your Windows display drivers, refer to README.TXT.