Softpaq Solution: SP1097 File Name: NPFC Title: NetWare Programs From Compaq (NPFC) Version: 2.55B Language: English CATEGORY: Drivers / Servers EFFECTIVE DATE: 04-24-95 PRODUCTS AFFECTED: All OPERATING SYSTEM: n/a SYSTEM CONFIGURATION: n/a SUPERSEDES: SP1047 KEYWORDS: DRIVERS NETFLEX NETWARE NETWORK NOVELL NPFC ODI SBACKUP SCSI SERVER SOFTPAQ DESCRIPTION: Contains the files to create the NetWare Programs From Compaq Diskette (181972-001) and NetWare Programs From Compaq Supplement Diskette (P/N 181973-001). The NPFC and NPFC Supplement diskettes contain NetWare drivers, NetWare Loadable Modules (NLMs), and support information to optimize the performance of NetWare on Compaq servers. The readme files for NPFC and NPFC Supplement are available as WINHELP files. To obtain the WINHELP files, download SoftPaq SP1098. The WHATSNEW.RDM file, found on each NPFC diskette, contains detailed information about the updates, new features, and fixes in this version. Some of the highlights include: CPQSDISK.DSK v2.01 Updates: - This driver has been updated to better handle hot-plugging a Fast-SCSI-2 drive into a drive bay previously occupied by a Fast-Wide SCSI-2 drive. With previous versions, the driver may have failed to initialize the replacement drive. CPQSCD.DSK v1.11 Updates: - Provides additional SCSI controller information for Compaq Insight Manager. CPQSTAPE.DSK Updates: - Now, the driver will sense the invalid media in the tape drive, and return the following error message: "CPQSTAPE: Error-incompatible medium is installed." CPQS710.DSK v2.01 Updates: - Fixes a problem in the CPQS710.DSK driver which may have caused CPQSDISK.DSK to send an alert to the console with the following error: CPQSDISK: The Compaq 53c710 SCSI Interface Module returned a CAM status 16h which is not supported by this driver. CPQSASPI.NLM v1.13 Updates: - Fixes Abend problem when loading CPQSASPI.NLM before the SCSI interface modules. CPQTOKEN.LAN and CPQ2TOK.LAN v2.43 Updates: - Fixed handling of beaconing conditions. The driver will now report the presence of a beaconing condition on the NetWare server console. - There is a new custom statistic, TX Abort Ring Beaconing, that appears in MONITOR.NLM. - The driver now checks for the minimum required version of TOKENTSM.NLM which is v2.32. - The driver now updates adapter collected statistics more frequently in MONITOR.NLM. This will help you monitor your network activity. CPQETHER.LAN and CPQ2ETH.LAN v2.43 Updates: - Fixes a problem that occurred when using AppleTalk and ETHERTSM.NLM v2.32 that prevented clients from connecting to the server. - The driver now checks for the minimum required version of MSM.NLM which is v2.32. - The driver now checks for the minimum required version of ETHERTSM.NLM which is v2.32 - The driver now updates adapter collected statistics more frequently in MONITOR.NLM. This will help you monitor your network activity. CPQNF3.LAN v1.00 FOR NetFlex-3 Controllers: - CPQNF3.LAN v1.00 supports the NetFlex-3 controllers which are new Compaq 10Base-T controllers. This controller supports modules that allow the controller to upgrade to 100Mbps data transfer. CPQNF3.LAN v1.10 Updates: - Includes a workaround for a Master Abort adapter check that may have been experienced on a NetFlex-3/E when the driver was reset. HOW TO USE: 1. Obtain two formatted 1.44 MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP1097.EXE. 3. From that drive and directory, execute the SoftPaq file: SP1097 [ENTER] You will be prompted to place the formatted 1.44 MB diskettes into a diskette drive to create the diskettes. 4. After the diskettes are created, you may delete the downloaded file SP1097.EXE if you wish. 5. Run README.COM on one of the newly created diskettes for an NPFC overview and installation instructions. Copyright 1995, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies