╨╧рб▒с;■  ■                                                                                                                                                                                                                                                                                                                                                                                                                                                   ¤   ■    ■   ■   ■                                                                                                                                                                                                                                                                                                                                                                                                                               Root Entry         └FЖ╡КлZ╚╣@CompObj            bWordDocument        ї%ObjectPool    Ж╡КлZ╚╣Ж╡КлZ╚╣■    ■                                                                                                                                                                                                                                                                                                                                                                                                                                                                               ■       └FMicrosoft Word 6.0 Document MSWordDocWord.Document.6;■  ■  рЕЯЄ∙OhлС+'│┘0РШ╝р ( L pФ╕ ▄$ Hl                                C:\WINWORD6\NORMAL.DOTSoftpaq Solution: SP1100Tom StoerzbachTom Stoerzbach@Ж┘Z╕Y╚╣@▄еe3└ eHї%H"▓"▓▓"▓"▓"▓"Hш"ш"ш"ш"ш"ш" Є"ш"%<########:#<#<#<#"^#╨.$╨■$X%Tм%I%▓"# ####%#▓"▓"######▓"#▓"#:#▓"╞""▓"▓"▓"▓"#:##,#Softpaq Solution: SP1100 File Name: SETSOFT.EXE Title: Sets soft drive types 65 and 66 on LTE Lite to allow drives not in fixed disk parameter table to work. Version: 1.0 _______________________________________________________________________ CATEGORY: Drivers / Miscellaneous EFFECTIVE DATE: 01/17/95 PRODUCTS AFFECTED: Compaq LTE Lite Family OPERATING SYSTEM: MS-DOS 5.0 or greater SYSTEM CONFIGURATION: LTE Lite with Desktop Expansion Base or SmartStation. DESCRIPTION: SetSoft v1.0 gives support for soft drive types 65 and 66 on the LTE Lite Family for the secondary controller built into the Desktop Expansion Base or SmartStation. NOTE: If switching between Elite and LTE Lite, drive parameters must match or DATA MAY BE LOST. Use Elite SETUP to examine fixed disk parameters, and use the SetSoft command line if SetSoft finds incorrect values. HOW TO USE: 1. After downloading the SoftPaq, copy it to an empty directory on your hard drive and change to that directory. If downloaded in zipped format (.ZIP), unzip the file to create an executable: PKUNZIP SP1100 2. From that drive and directory, execute the SoftPaq file to unbind the primary files: SP1100 [ENTER] The following files should be created: 3. Obtain a formatted 1.44 MB diskette. 4. To create the diskette and install the software, refer to SP1100.DOC. HOW TO USE: 1. Set LTE Lite Secondary Controller Drive 1 to type 65 and Drive 2 (if it exists) to type 66. 2. Edit CONFIG.SYS and place the following line before any driver that talks to the drive: DEVICE=\SETSOFT.EXE where is the path where SETSOFT.EXE is to be found 3. For DOS EXTDISK.SYS is needed to access the secondary controller. 4. SetSoft will display configuration of drive (see Sample Program Output) at load time. When switching between Elite and LTE Lite computers make sure these parameters match. If they do not, use command line to specify correct parameters. Running SETSOFT at a DOS prompt will show configuration and the help screen. 5. Optional parameters for use in CONFIG.SYS: /C:xxxx, where xxxx is a decimal number from 1 to 1023 for the number of Cylinders of the drive, /H:xxx, where xxx is a decimal number from 1 to 255 for the number of Heads of the drive, /S:xx, where xx is a decimal number from 1 to 63 for the number of Sectors of the drive, /E:xxx, where xxx is a decimal number from 1 to 255 for the number of ECC bytes for burst, All of the above values must be entered for a valid entry. The second entry of each of the above will go to softdrive type 66 for the case of two drives. The following parameters are optional: /O allows more than 1023 cylinders to be entered, Windows 95 will support > 528M drives, EXTDISK does not. /N allows more than 1023 cylinders to be entered, but does not translate drive, translation doubles the number of heads and halves the number of cylinders Example: DEVICE=\SETSOFT.EXE /C:897 /H:15 /S:62 /E:4 SAMPLE PROGRAM OUTPUT: Output when valid drive parameters are entered or found: SetSoft v1.0 - Copyright (C) COMPAQ Computer Corp. 1995 Setting up softdrive 65 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 Setting up softdrive 66 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 where the correct values replace the zeros. Output when invalid drive parameters are entered or found: SetSoft v1.0 - Copyright (C) COMPAQ Computer Corp. 1995 Setting up softdrive 65 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 Setting up softdrive 66 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 No drive(s) defined! Invalid Drive Parameters! /C:xxxx decimal number (1-1023) of Cylinders /H:xxx decimal number (1-255) of Heads /S:xx decimal number (1-63) of Sectors /E:xxx decimal number (1-255) Length of ECC Data Burst /O override and translate > 1023 Cylinder limit /N override and no translate > 1023 Cylinder Note: The first entries will set drive type 65, the second entries will set drive type 66. In SETUP configure first drive as TYPE 65 and second drive as TYPE 66. Example: DEVICE=\SETSOFT.EXE /C:899 /H:15 /S:62 /E:4 Press Any Key to Continue! EFFECTS ON YOUR SYSTEM: Configures Fixed Disk Parameter Table with values for drive types 65 and 66. Compaq Systems Engineering COMPAQ COMPUTER CORP. 01/17/95 T        SummaryInformation(            └                                    @Ж}юОZ╚╣@ъV·Microsoft Word 6.03                                                                                                                                                                                                H\■u2бпў°67bcМН┌█ОПghvwIJ│█▄▌▐RSTUabз╓╫" G H | } ■■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-} ├ ─    ` н Ў C М Н ─ ┼ O Ф ╙  W Ь ▄ ▌ )u╝╙╘bДЕ╠[}~ФХ╫╪яЁё*+■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-+,jkЩ╫╪DEFrstu░▒▓Ёё]^М╩╦8kЯт"_Ц╬/0qrУФХЦоп■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-пє  )H■└!ь■└!ь■└!ь■└!ь■└!ь■└!ьK@ё Normala "A@Є б"Default Paragraph FontF■OЄFHanging)D╝■Ё0¤╨аp@ р]b!        sT\ } +пH ,Tom StoerzbachC:\SOFTPAQ\WORK\SP1100.DOC @COMPAQ PAGEMARQ 15LPT1:COMPAQPSCOMPAQ PAGEMARQ 15 DМ[ъ od ■  ┬ZZeCOMPAQ PAGEMARQ 15 DМ[ъ od ■  ┬ZZeАLLААLH<РTimes New Roman РSymbol &РArial "РHelv"И╨hтвёешвёеГ$ISoftpaq Solution: SP1100Tom StoerzbachTom Stoerzbach╨╧рб▒сRoot Entry         └FЖLй?\╚╣@CompObj            bWordDocument         N'ObjectPool    Ж╡КлZ╚╣Ж╡КлZ╚╣                                                                                                    ¤   ■   ■   ■   ■   !"#$%&'()*+,-./012                                                                                                                                                                                                                                                                                                                    SummaryInformation(            └                                    ■    ■                                                                                                                                                                                                                                                                                                                                                                                                                                                                               ■       └FMicrosoft Word 6.0 Document MSWordDocWord.Document.6;■  ■  рЕЯЄ∙OhлС+'│┘0РШ╝р ( L pФ╕ ▄$ HlC:\WINWORD6\NORMAL.DOTSoftpaq Solution: SP1100Tom StoerzbachTom Stoerzbach@Ж┘Z╕Y╚╣@@Ж┼<\╚╣@Оъ╨Microsoft Word 6.04}НgУjХkvw▄ 'ВR<РTimes New Roman РSymbol &РArial "РHelv"И╨hтвёеЇвёе Г$ISoftpaq Solution: SP1100Tom StoerzbachTom Stoerzbach╨╧рб▒с;■  ■                                                                                                     ▄еe3└ eHN'/"▓"▓▓"▓"▓"▓"▓"0#▄"T0#0#0#0# :#0#u&<V#V#V#V#V#V#V#V#В#Д#Д#Д#"ж#╨v$╨F%▒&T'Id%▓"V# V#V#V#V#d%V#▓"▓"V#V#V#V#V#V#▓"V#▓"V#В#╞"╬"▓"▓"▓"▓"V#В#V#,V#Softpaq Solution: SP1100 File Name: SETSOFT.EXE Title: Sets soft drive types 65 and 66 on LTE Lite to allow drives not in fixed disk parameter table to work. Version: 1.0 _______________________________________________________________________ CATEGORY: Drivers / Miscellaneous EFFECTIVE DATE: 01/17/95 PRODUCTS AFFECTED: Compaq LTE Lite Family OPERATING SYSTEM: MS-DOS 5.0 or greater SYSTEM CONFIGURATION: LTE Lite with Desktop Expansion Base or SmartStation. DESCRIPTION: SetSoft v1.0 gives support for soft drive types 65 and 66 on the LTE Lite Family for the secondary controller built into the Desktop Expansion Base or SmartStation. NOTE: If switching between Elite and LTE Lite, drive parameters must match or DATA MAY BE LOST. Use Elite SETUP to examine fixed disk parameters, and use the SetSoft command line if SetSoft finds incorrect values. HOW TO USE: 1. After downloading the SoftPaq, copy it to an empty directory on your hard drive and change to that directory. If downloaded in zipped format (.ZIP), unzip the file to create an executable: PKUNZIP SP1100 2. From that drive and directory, execute the SoftPaq file to unbind the primary files: SP1100 [ENTER] The following files should be created: 3. Obtain a formatted 1.44 MB diskette. 4. To create the diskette and install the software, refer to SP1100.DOC. HOW TO USE: 1. Set LTE Lite Secondary Controller Drive 1 to type 65 and Drive 2 (if it exists) to type 66. 2. Edit CONFIG.SYS and place the following line before any driver that talks to the drive: DEVICE=\SETSOFT.EXE where is the path where SETSOFT.EXE is to be found 3. For DOS EXTDISK.SYS is needed to access the secondary controller. 4. SetSoft will display configuration of drive (see Sample Program Output) at load time. When switching between Elite and LTE Lite computers make sure these parameters match. If they do not, use command line to specify correct parameters. Running SETSOFT at a DOS prompt will show configuration and the help screen. 5. Optional parameters for use in CONFIG.SYS: /C:xxxx, where xxxx is a decimal number from 1 to 1023 for the number of Cylinders of the drive, /H:xxx, where xxx is a decimal number from 1 to 255 for the number of Heads of the drive, /S:xx, where xx is a decimal number from 1 to 63 for the number of Sectors of the drive, /E:xxx, where xxx is a decimal number from 1 to 255 for the number of ECC bytes for burst, All of the above values must be entered for a valid entry. The second entry of each of the above will go to softdrive type 66 for the case of two drives. The following parameters are optional: /O allows more than 1023 cylinders to be entered, Windows 95 will support > 528M drives, EXTDISK does not. /N allows more than 1023 cylinders to be entered, but does not translate drive, translation doubles the number of heads and halves the number of cylinders Example: DEVICE=\SETSOFT.EXE /C:897 /H:15 /S:62 /E:4 SAMPLE PROGRAM OUTPUT: Output when valid drive parameters are entered or found: SetSoft v1.0 - Copyright (C) COMPAQ Computer Corp. 1995 Setting up softdrive 65 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 Setting up softdrive 66 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 where the correct values replace the zeros. Output when invalid drive parameters are entered or found: SetSoft v1.0 - Copyright (C) COMPAQ Computer Corp. 1995 Setting up softdrive 65 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 Setting up softdrive 66 with values: Cylinders: 0000 Heads: 000 Sectors: 00 ECC: 000 No drive(s) defined! Invalid Drive Parameters! /C:xxxx decimal number (1-1023) of Cylinders /H:xxx decimal number (1-255) of Heads /S:xx decimal number (1-63) of Sectors /E:xxx decimal number (1-255) Length of ECC Data Burst /O override and translate > 1023 Cylinder limit /N override and no translate > 1023 Cylinder Note: The first entries will set drive type 65, the second entries will set drive type 66. In SETUP configure first drive as TYPE 65 and second drive as TYPE 66. Example: DEVICE=\SETSOFT.EXE /C:899 /H:15 /S:62 /E:4 Press Any Key to Continue! EFFECTS ON YOUR SYSTEM: Configures Fixed Disk Parameter Table with values for drive types 65 and 66. Compaq Systems Engineering COMPAQ COMPUTER CORP. 01/17/95 T         Thissthe ote SETSOFT.EXE SETSOFT.DOCSETSOFT.DOC.H\bcgjkvwВО■u 2бпў°67bcМН┌█ОПghvwIJ│█▄▌▐RSTUabз╓╫" G H | } ■■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-} ├ ─    ` н Ў C М Н ─ ┼ O Ф ╙  W Ь ▄ ▌ )u╝╙╘bДЕ╠[}~ФХ╫╪яЁё*+■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-+,jkЩ╫╪DEFrstu░▒▓Ёё]^М╩╦8kЯт"_Ц╬/0qrУФХЦоп■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь-пє  )Hw■└!ь■└!ь■└!ь■└!ь■└!ь■└!ь■└!ьK@ё Normala "A@Є б"Default Paragraph FontF■OЄFHanging)D╝■Ё0¤╨аp@ р]b/        !  /2ЯЦуфЁ¤/└!ь└!ь└!ь└!ь└!ь└!ь└!ь└!ьО } +пw ,Tom StoerzbachC:\SOFTPAQ\WORK\SP1100.DOC @COMPAQ PAGEMARQ 15LPT1:COMPAQPSCOMPAQ PAGEMARQ 15 DМ[ъ od ■  ┬ZZeCOMPAQ PAGEMARQ 15 DМ[ъ od ■  ┬ZZeАЪЪЪЧ =dQW]^mqФЧЪЬЭфяЁ√"./>а\hbnc