Softpaq Solution:  SP1111
File Name:  P/N 181621-003
Title:  Software Support Diskette for Microsoft Windows NT Version 3.5J
Version:  1.13J
Language:  Japanese
_______________________________________________________________________ 

CATEGORY:  Drivers / Miscellaneous

EFFECTIVITY DATE:  02-07-95

PRODUCTS AFFECTED:  All Systems Products

OPERATING SYSTEM:  Microsoft Windows NT Version 3.5J

SYSTEM CONFIGURATION:  Not applicable

SUPERCEDES:  NONE

DESCRIPTION:  Support drivers for Compaq Hardware using Windows NT 3.5J

What's New on NT SSD 1.13J
--------------------------
This release of the Compaq Support Software Diskette for Windows NT 3.5J  (NT SSD) contains the following new features\maintenance modifications.

Compaq 32-Bit SCSI-2 Controllers Support:
-  Corrected the maximum transfer length reported to Windows NT.
-  Fixed problem where processing certain IOCTL_SCSI_PASS_THROUGH and      IOCTL_SCSI_PASS_THROUGH_DIRECT device I/O control calls would cause the system to blue screen.

Compaq Systems Management Support:
-  Health driver enhancement to filter out incorrect fan and temperature events, which were causing systems to shutdown.

Compaq Drive Array Support:
-  Fixed SCSI inquiry string reporting.  Compaq disk array incorrectly displayed under ARCServe for NT.

Compaq Video Support:
-  Fixed problem where Control Panel was reporting incorrect video memory size.

 Compaq Integrated NetFlex Support:
-  Fixed problem where an address glitch inside the chip would cause clients to drop and a server hang.
-  Fixed boot problem during NT installation over the network.  The installation required cold booting after NT had been installed.

HOW TO USE:  

1.  After downloading the SoftPaq, copy it to an empty directory on your hard drive and change to that directory.  If downloaded in zipped format (.ZIP), unzip the file to create an executable:  PKUNZIP SP1111

2.  From that drive and directory, execute the SoftPaq file to unbind the primary files:  SP1111 [ENTER]
The following files should be created: 

QRST5.EXE
READ.ME
181621-C._01

3.  Obtain a formatted 1.44 MB diskette.

4.  To create the diskette and install the software, refer to READ.ME (Japanese) .