Softpaq Solution: SP1250 File Name: P/N 140229-001 Title: Compaq PCMCIA Support Version: 3.12 CATEGORY: Software Solutions / Laptop EFFECTIVE DATE: 12 June 1995 PRODUCTS AFFECTED: Contura 400 Family and LTE Elite OPERATING SYSTEM: MS-DOS 5.0 or greater, Microsoft Windows 3.1 SYSTEM CONFIGURATION: As per OPERATING SYSTEMS, above. SUPERSEDES: SP1045 for LTE Elite and Contura 400 Family ONLY DESCRIPTION: This will create the Compaq PCMCIA Support Diskette Version 3.12. Portable Computer Setup for Windows Version 3.00 (SP1246) is used in conjunction with these updated PCMCIA Drivers. UPDATES: Hibernation and Standby - Avoids lockup when going into Hibernation with New Media modems and Berg SRAM PC card. - Avoids lockup when returning from Standby with MODEM and SRAM present. - Corrects system lockup when exiting Standby with TDK modems. - Allows ATA cards to work after returning from Standby or Hibernation. Card Specific - Eliminates EMS conflict with ATA cards when RAM switch is used in EMM386. General - Upgraded Card and Socket services to CardSoft version 3.12 (supports PCMCIA v2.1). - Allows file transfers between PCMCIA modems and drive A:. Enhancement Increased memory available, enhancing overall system performance. HOW TO USE: 1. Obtain one formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP1250.EXE. 3. From that drive and directory, execute the SoftPaq file: SP1250 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette. 4. After the diskette is created, you may delete the downloaded file SP1250.EXE if you wish. 5. Insert the diskette into the A: drive. From TabWorks or File Manager, select File, Run.... 6. In the Command Line, type: A:\INSTALL [ENTER] Copyright 1995, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.