SoftPaq Solution:  SP1447
Filename:  SP1447
Title:  LAN Adapter Support Software for VINES 6.0 
Version:  1.01

CATEGORY:  Drivers / Servers

EFFECTIVE DATE:  03 Dec 1995

PRODUCTS AFFECTED:  All Compaq Products

OPERATING SYSTEM:  Banyan VINES 6.0 (10) & above

SYSTEM CONFIGURATION:  Any Compaq Server System

SUPERSEDES:  SP1424

DESCRIPTION:  The LAN Adapter Support Software Diskettes (SSD) contain a collection of VINES 6.0 (10) certified drivers for Compaq NICs.  This Softpaq creates two diskettes containing the drivers.

Disk Controller Support:

     o  Rev 1.00: Compaq NetFlex-3 Controller driver 
             Compaq NetFlex-3/E (EISA) controller with TX and VG modules
             Compaq NetFlex-3/P (PCI)  controller with TX and VG modules

     o  Rev 1.01: Compaq NetFlex L ENET Controller driver 
             Integrated NetFlex-L ENET controller EISA based
             Integrated NetFlex-L ENET controller PCI based

HOW TO USE:

1.  Obtain two formatted 1.44 MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file that is downloaded is SP1447.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP1447 [ENTER]
The following files should be created: 
    SP1447.DOC
    SP1447._01
    SP1447._02
    QRST5.EXE

4.  Refer to file SP1447.DOC for instructions on how to create the diskettes by running this command at the DOS prompt:
     QRST5 [ENTER]

5.  When the SSD diskettes have been created, insert the documentation diskette into drive A and perform one of the following to view the installation instructions:
     From a DOS prompt enter "a:\readme"
          or
     Boot the system with the diskette in drive a:

Copyright 1995, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies