Softpaq Solution:  SP1725
Part Number: 183866-061
Title:  Compaq Personal Computer Diagnostics/TEST
Version:  10.09 Rev B
Language: Italian

CATEGORY:  Diagnostics/Test

EFFECTIVE DATE:  05 May 1996

PRODUCTS AFFECTED:
Desktops               Portables
================================
Deskpro/M Family       Concerto
Deskpro/i Family       Contura Family
Deskpro XE Family      Contura Aero Family
Deskpro XE Family/NIC  Contura 400 Family
Deskpro XL Family      LTE Lite Family
Deskpro  Family        LTE Elite
ProLinea Family        Portable 486/486c
ProLinea CDS Family    LTE 5000 Family
Presario family

OPERATING SYSTEM:  not applicable

SYSTEM CONFIGURATION: not applicable

SUPERCEDES: SP1456

DESCRIPTION:
Compaq Personal Computer Diagnostics resides on two 1.44 MB floppy diskettes.  One is the Diagnostics/TEST diskette (this SoftPaq).  The other is the Diagnostics/SETUP diskette.
NOTE: The SETUP diskette will become product-specific after Version 10.06 Rev E.  Until new product-specific versions of  SETUP are available, continue to use Diagnostics/SETUP Version 10.06 Rev E (Softpaq SP1363) in conjunction with this and future Diagn
ostics/TEST Versions.

Diagnostics/TEST supports ALL currently shipping personal computer (non-server) products.  It is installed on the Diagnostics Partition for those systems which support it and have hard drives.  It is shipped as diskette(s) on all other products.

A Compaq Personal Computer Diagnostics/TEST diskette contains programs that can:
- TEST both Compaq EISA and ISA machines from the Desktop and Portable Divisions.
- INSPECT (display machine config) both Compaq EISA and ISA machines from the Desktop and Portable Divisions.

A Compaq SETUP diskette contains programs that can:
- Configure Compaq ISA machines.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change to that directory.  The file downloaded to your hard drive is SP1725.EXE.

2. Obtain one (1) formatted 1.44MB diskette and place it in one of your diskette drives.

3. Execute the SoftPaq file to create the diskette:  SP1725[ENTER]

4. After the diskette is created, you may delete the downloaded file SP1725.EXE if you wish.

5. To run Diagnostics/TEST, power down your computer, place the Diagnostics/TEST diskette in Drive A:, and power up your computer.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies