Softpaq Solution:  SP1735
File Name:  P/N 181867-053 (Disk 1)
            P/N 181868-053 (Disk 2)
Title:  Windows 3.1 Support for QVision
Version:  7.70 Rev A.
Language: French

CATEGORY:  Drivers / Video

EFFECTIVE DATE:  05 May 1996

PRODUCTS AFFECTED:  Any unit using:
QVision 1024/I/E
QVision 1280/I/E/P
Advanced Video Graphics Controller (AVGC)

OPERATING SYSTEM:  MS-DOS 5.0 or greater and Windows 3.1.

SYSTEM CONFIGURATION:  DOS and Windows 3.1.

SUPERSEDES:  SP1241

DESCRIPTION: This is a release of the QVision Windows 3.1 display support diskettes.  It replaces version 7.42b.  This software will NOT support the QVision 2000 controller.

HOW TO USE:

1.  Obtain two formatted 1.44 MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file that is downloaded is SP1735.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1735 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create each diskette.

4.  After the diskettes are created, you may delete the downloaded file SP1735.EXE if you wish.

5.  At this point, the Driver Support diskettes have been created and are ready to use for upgrading.

6.  Please read all READMEs before installing this new driver.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies