Softpaq Solution:  SP1762
File Name:  P/N 183974-001
Title:  Deskpro 4000/6000 Windows 3.1 Audio Drivers for ESS 1868
Version:  4.16.15

CATEGORY:  Drivers/Desktops

EFFECTIVE DATE:  22 July 1996

PRODUCTS AFFECTED:
Compaq Deskpro 4000/6000 models with ESS 1868 Audio Controller,
including the following:
Deskpro 4000 - Models 5166, 6180, 6200
Deskpro 6000 - Models 5166, 5200, 6180, 6200

OPERATING SYSTEM:  MS-DOS and Windows 3.1.

SYSTEM CONFIGURATION:  DOS and Windows 3.1.

SUPERSEDES:  N/A

DESCRIPTION:  Creates a diskette providing Windows 3.1 audio drivers for
the Compaq ESS 1868 Audio Controller used in the above referenced
Deskpro 4000/6000 models.

HOW TO USE:

1.  Obtain one formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file that is downloaded is SP1762.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1762 [ENTER]
You will be prompted to place a formatted 1.44 MB diskette into the
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file
SP1762.EXE if you wish.

5.  At this point, the Audio Support diskette has been created and
is ready to use for upgrading.

6.  Start Windows.

7.  Insert the diskette into drive A.

8.  Select File Manager, Run... Type A:\SETUP and press <ENTER>.

9.  If previous versions of ESS drivers are installed, uninstall
these drivers.  Restart the computer and run the same SETUP
program again (see step 8).

10. Install the new drivers.

11. Follow the prompts to complete installation.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.