Softpaq Solution:  SP1940
Filename:  SP1940
Title:  Peripheral Adapter Support Software for Banyan Vines 6.0 
Version:  1.06

CATEGORY:  Drivers/Servers

EFFECTIVE DATE:  18 June 1996

PRODUCTS AFFECTED:  All Compaq Products

OPERATING SYSTEM:  Banyan Vines 6.0

SYSTEM CONFIGURATION:  Any Compaq Server System

SUPERSEDES:  SP1532

DESCRIPTION:  This creates the Peripheral Adapter Support Software 
Diskette, Ver. 1.06, containing a collection of Vines 6.0 drivers for 
Compaq devices other than network adapters.  The drivers and controllers 
supported are:

- Rev 1.0: Remote Insight Board Driver for Banyan VINES 6.20 (0)

        Rev 1.0 :  RI Agent. This runs as a daemon and interacts with
                   the RIB Driver and Health, IDA Agents to send down
                   SNMP Traps to Remote Insight Board.

        Rev 1.0 :  Health Agent. This runs as a daemon and monitors the
                   Correctable Memory errors count, and informs RI Agent
                   to send a SNMP Trap whenever a Correctable Memory 
                   Error occurs.

        Rev 1.0 :  IDA Agent. This runs as a daemon and monitors the
                   status of the Drive Array configured on the machine.
                   It informs RI Agent to send an SNMP Trap in case
                   there is any change in the status of the logical,
                   physical and spare drives.

        Rev 1.0 :  RIVIEW. This is a curses based utility which allows
                   the user to monitor the Drive Array and Correctable
                   Memory status on the server.

        Rev 1.0 :  RICONFIG. This is a curses based utility which allows
                   the user to view and online configure the Remote 
                   Insight Board.

- Rev 1.02: Compaq Smart-2 (EISA / PCI) Array Controller driver
        Compaq Smart-2 Array EISA controller
        Compaq Smart-2 Array PCI controller

         Rev 1.02: Compaq Additional Support for Smart-2 Array controller 
                  driver

         Rev 1.0: Compaq "CPQS2" utility - Online utility to display 
                  Smart-2 Array controller information for logical 
                  drives.

- Rev 1.4: NCR SCSI device driver package for Banyan VINES 6.00 
           and 6.00 (10):

         Rev 1.1: Compaq Fast-Wide SCSI-2 / EISA 53C825 driver
             Compaq Integrated 32-Bit Fast-Wide SCSI-2/E controller
             Compaq 32-Bit Fast-Wide SCSI-2/E controller

         Rev 1.1: NCR 53C825 PCI-SCSI (Fast-Wide SCSI-2) driver
             Compaq Integrated 32-Bit Fast-Wide SCSI-2/P controller
             Compaq 32-Bit Fast-Wide SCSI-2/P controller

         Rev 1.2: NCR 53C810 PCI-SCSI (Fast SCSI-2) driver
             Compaq Integrated 32-Bit Fast-SCSI-2/P controller
     
         Rev 1.3: Compaq Fast SCSI-2 / 53C710 EISA SCSI driver
             Compaq Integrated 32-Bit Fast-SCSI-2 controller
             Compaq 32-Bit Fast-SCSI-2 controller

         Rev 1.2: NCR SCSI Driver Common Library 

- Rev 1.00: Banyan IDA, IDA-2, IAES & Smart SCSI Array controller driver

HOW TO USE: 

1.  Obtain two formatted 1.44 MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP1940.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP1940 [ENTER]
The following files should be created: 
SP1940.DOC
SP1940._01
SP1940._02
QRST5.EXE

4.  Refer to SP1940.DOC for instructions on creating the diskettes using 
QRST5 and installing the software.   Insert the documentation diskette 
into drive A and perform one of the following to view online 
installation instructions:
- From a DOS prompt enter "a:\readme"
   or
- Boot the system with the diskette in drive A: 

5.  After the diskettes are created, you may delete the downloaded file 
SP1940.EXE and the other files it created on your hard drive if you 
wish.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies