Softpaq Solution:  SP2109
Part Number:  183239-334
Title:  Computer Setup/VP, Version 1.50
Version:  1.50 Rev(B)
Language:  Dutch

NOTE: Compaq Personal Computer Diagnostics/TEST may also be required
(Ver 10.10A is available in Softpaq SP1848).

CATEGORY:  Diagnostics/Setup

EFFECTIVE DATE:  28 July 1996

PRODUCTS AFFECTED:
Deskpro 4000 Family
Deskpro 6000 Family
		
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

SUPERSEDES:  N/A

DESCRIPTION:  This Softpaq creates two diskettes that allow a user to
upgrade to Version 1.50B of Computer SETUP for Compaq Desktops/VP, or
to restore this utility to the Diagnostics Partition if that partition
has been destroyed.  SETUP is pre-installed on the Diagnostics Partition
of the affected products and can be run by by pressing F10 when the
cursor moves to the upper right corner of the screen during power-up or
reboot.  SETUP can also be run directly from the diskettes created by
this SoftPaq.

SETUP allows the user to configure Security and Power Management
settings as well as system resources (DMA, IRQ, I/O Ports, and Memory).

Compaq Personal Computer Diagnostics/TEST is also pre-installed on the
Diagnostics Partition and can be accessed in the same way by pressing
F10.  If necessary to upgrade or restore the TEST utility, diskettes can
be downloaded (for example, Ver 10.10A is available in Softpaq SP1848).
TEST contains programs that can TEST and INSPECT (display machine
config) Compaq EISA and ISA machines from the Desktop and Portable
Divisions.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file downloaded to your hard drive is SP2109.EXE.

2. Obtain two (2) formatted 1.44MB diskette.

3.  From that drive and directory, execute the SoftPaq file:
    SP2109 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file
SP2109.EXE if you wish.

5.  To install this version of Computer SETUP for Compaq Desktops/VP on
the Diagnostics Partition, or to run it directly from the diskettes,
power down your computer, place Diskette #1 in Drive A:,
power up your computer, and follow the on-screen menu.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies