Softpaq Solution:  SP2128
File Name:  P/N 182903-005
Title:  ProLiant ROMPaq Firmware Upgrade Diskette
Version:  3.03 Rev A

CATEGORY:  ROMPaq

EFFECTIVE DATE:  31 July 1996

PRODUCTS AFFECTED:  Compaq ProLiant Servers

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

SUPERSEDES:   SP1998

DESCRIPTION:  This creates a diskette with updated system ROM images for 
ProLiant servers.
Note:  For ProSignia and Systempro servers, see Softpaq SP2127.

Enhancements:
- Added support for the year 2000
- Added extended year display and ROM date in SI table
- Makes ROM writable before updating the ROM date
- Added extra read from 8042 data input port during POST enable of 
keyboard INT to fix an intermittent keyboard lockup problem at the F1 
prompt
- Added support for allowing CF to specify whether or not GAT mode is 
enabled
- Replaced SCSI support with new SCSI option ROM
- Added code to allow Com1 or Com2 to be on IRQ 3, 4, or 5 so config 
"pager test" operates consistently

HOW TO USE:
1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP2128.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP2128 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a 
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file 
SP2128.EXE if you wish.

5.  Refert to the README file on the diskette for specific upgrade 
instructions and additional help.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies