SOFTPAQ NUMBER: SP2166 PART NUMBER: 173009-009 FILE NAME: N/A TITLE: ROMPaq Upgrade for Deskpro/ProLinea 486G Family VERSION: 486G _050196 LANGUAGE: English CATEGORY: ROMPaqs PRODUCTS AFFECTED: Prolinea 5xxx and Deskpro 5xxx in 486G ROM Family OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 01 May 1996 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP1923 (Note: SP2166 and SP1923 contain identical ROMPaqs; however, SP2166 is able to create the ROMPaq diskette on an LS-120 drive, and SP1923 is not.) DESCRIPTION: This creates a ROMPaq firmware upgrade diskette on a 1.44-MB drive or an LS-120 drive. The diskette upgrades the System ROM on Deskpro and ProLinea units with a 486G Family ROM to the 05/01/96 version. The ROM Family and ROM date can be determined by running F10 Setup. This 05/01/96 version stays connected to a network after wakeup from suspend mode, fixes problems with "format /s" and "sys" commands with some drives, fixes POST problems with Sony Multiscan monitors, and fixes a lost video problem with the Artist PCI Video adapter. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2166.EXE. 3. From that drive and directory, execute the SoftPaq file: SP2166 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette. 4. After the diskette is created, you may delete the downloaded file SP2166.EXE if you wish. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 05/01/96 Compaq System ROM and flash the firmware. IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE! Copyright 1996, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies