SOFTPAQ NUMBER: SP2167 PART NUMBER: 182614-012 FILE NAME: N/A TITLE: ROMPAQ Upgrade for Deskpro/ProLinea 486Y Family VERSION: 486Y_042596 LANGUAGE: English CATEGORY: ROMPaqs PRODUCTS AFFECTED: Prolinea 5xxx and Deskpro 5xxx in 486Y ROM Family OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 24 April 1996 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP1924 (Note: SP2167 and SP1924 contain identical ROMPaqs; however, SP2167 is able to create the ROMPaq diskette on an LS-120 drive, and SP1924 is not.) DESCRIPTION: This creates a ROMPaq firmware upgrade diskette on a 1.44-MB drive or an LS-120 drive. The diskette upgrades the System ROM on Deskpro and ProLinea units with a 486Y Family ROM to the 04/25/96 version. The ROM Family and ROM date can be determined by running F10 Setup. This 04/25/96 version fixes erroneous 202 error messages on warm boots for EDO machines, stays connected to the network after wakeup from suspend mode, fixes problems with "format /s" and "sys" commands with some drives, and fixes POST problems with Sony Multiscan monitors. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2167.EXE. 3. From that drive and directory, execute the SoftPaq file: SP2167 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette. 4. After the diskette is created, you may delete the downloaded file SP2167.EXE if you wish. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 04/25/96 Compaq System ROM and flash the firmware. IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE! Copyright 1996, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies