SOFTPAQ NUMBER: SP2384 PART NUMBER: N/A FILE NAME: IOS0913.EXE TITLE: Netelligent 8500 Open Communications Platform VERSION: 1.1 LANGUAGE: English CATEGORY: Software Solutions/Misc PRODUCTS AFFECTED: Netelligent 8500 Multi-Protocol Routers OPERATING SYSTEM: Cisco IOS Version 1.26 and higher SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 01 Oct 1996 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: N/A DESCRIPTION: Use these files to upgrade Netelligent 8500 Multi-Protocol Routers to Netelligent 8500 Open Communications Platform Version 1.1. Contains the CISCO IOS, drivers, firmware, and SASH (Standalone Shell) Utility, Version 1.11. IOS0913.EXE (dated 9-13-96) has the following features: 1. Frame Relay/compression/MLB 2. PPP with Compression 3. Router Synchronization 4. X.21 signaling 5. IPX routing tables 100196BX.BIN (dated 10-01-96) has the following fixes: 1. Resolved PCI bus timing problem when four TLAN adapters are installed. 2. Modified the PCI BIOS so that the PCI device search order appears as if it was from the bottom most slot to the topmost. In the SASH (Standalone Shell) Utility Version 1.11, the LED will go solid green only if the IOS is spawned. Also, if the IOS is not present, the LED will flash twice in amber. This will prevent the confusion caused by a solid light when the pccard is unplugged. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2384.EXE. 2. From that drive and directory, execute the SoftPaq file: SP2384 [ENTER] The following files should be created: 100196BX.BIN IOS0913.EXE INSTALL.BAT SP2384.DOC README.TXT 3. After the files are created, you may delete the downloaded file SP2384.EXE if you wish. 4. Refer to README.TXT for detailed instructions on installing and using the software. Copyright 1996, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies