SOFTPAQ NUMBER: SP2477 PART NUMBER: 183239-075 FILE NAME: N/A TITLE: Computer Setup/VP and PC Diagnostics VERSION: 160 Rev A for Computer Setup/VP 10.11 Rev B for PC Diagnostics LANGUAGE: Spanish CATEGORY: Diagnostics/Setup PRODUCTS AFFECTED: Compaq Deskpro 4000/6000 Series OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 18 October 1996 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP1803 and SP1990 for the Deskpro 4000/6000 Series DESCRIPTION: Creates three diskettes: - Two (2) diskettes for Computer Setup/VP Version 160 Rev A - One (1) diskette for Personal Computer Diagnostics Version 10.11 Rev B These related utilities were formerly in two separate SoftPaqs. Computer Setup and PC Diagnostics are both pre-installed on the Diagnostics Partition. The diskettes in this SoftPaq can be used to update these utilities on the Diagnostics Partition or to restore them if the Diagnostics Partition has been destroyed. Both utilities can be run by pressing F10 when the cursor moves to the upper right corner of the screen during power-up or reboot. Or they can be run directly from these diskettes. Computer Setup allows the user to configure security and power management settings as well as system resources (DMA, IRQ, I/O Ports, and Memory). Personal Computer Diagnostics contains programs that can test and inspect the state of the computer and its devices. It is used with the Deskpro 4000/6000 Series, as well as other Compaq desktops and portables. HOW TO USE: 1. Obtain three (3) formatted 1.44MB diskettes and place the first one in one of your diskette drives. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2477.EXE. 3. Execute the SoftPaq file to create the three diskettes: SP2477[ENTER] You will be prompted to enter the additional diskettes. Label them as follows: First Diskette -- Computer Setup/VP Version 1.60 Rev A (Disk 1 of 2) Second Diskette -- Computer Setup/VP Version 1.60 Rev A (Disk 2 of 2) Third Diskette -- Personal Computer Diagnostics Version 10.11 Rev B 4. After the diskettes are created, you may delete the downloaded file SP2477.EXE if you wish. 5. To install Computer Setup/VP on the Diagnostics Partition, or to run it directly from the diskettes, power down your computer, place the first diskette created in Drive A:, power up your computer, and follow the on-screen menu. 6. To install Personal Computer Diagnostics on the Diagnostics Partition, or to run it directly from the diskettes, power down your computer, place the third diskette created in Drive A:, power up your computer, and follow the on-screen menu. Copyright 1996, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies