SOFTPAQ SOLUTION:  SP2490
PART NUMBER:   275542-052, 275543-052, 275544-052, 275545-052
FILE NAME:  N/A
TITLE:  Compaq System Configuration Utility
VERSION:  2.32 Rev C
LANGUAGE:  French

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED:  ProSignia, ProSignia VS, ProSignia 300, 
ProSignia 500, Systempro, Systempro/E, Systempro/LT, Systempro/XL, 
Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family, Portable 486, 
ProLiant 1000, ProLiant 1500, ProLiant 2500, ProLiant 2000/4000, 
Rack-Mountable ProLiant Servers, ProLiant 4500, ProLiant 5000

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  01 November 1996

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP2397

DESCRIPTION:  Creates the four System Configuration For Compaq EISA and 
EISA/PCI Products diskettes, which support all currently shipping 
Systems Division server products.  It is installed on the System 
Partition for those systems which support it and have hard drives. It 
is shipped as diskette(s) on all other products.

New Features:
When the System Configuration Utility detects a Compaq SMART Array 
Controller and a Revision 2 or earlier of the Compaq Remote Insight 
Board in a Proliant 1500, a message will be displayed informing the 
user that a Revision 3 or later Compaq Remote Insight Board must be 
acquired from Compaq.

Problems Fixed: 
When using the System Configuration Utility version 2.32 Rev A, the 
Thermal Shutdown functionality of the ProLiant 2000 was not properly 
configured. This caused the feature to be unavailable.  A common 
symptom of this issue is that the NetWare Server Health NLM fails 
to load.

HOW TO USE

1. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file downloaded to your hard drive is SP2490.EXE.

2. Obtain four (4) formatted 1.44MB diskettes and place a diskette in 
one of your diskette drives.

3. Execute the SoftPaq file to create the diskettes:  SP2490 [ENTER]  
You will be prompted to enter the remaining diskettes when needed.

4. After the diskettes are created, you may delete the downloaded file
SP2490.EXE if you wish.

5. To run the Compaq System Configuration Utility, power down your 
computer, place the Compaq System Configuration Utility diskette 1 in 
Drive A:, and power up your computer.

Copyright 1995,1996 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies