ESSCFG.EXE allows the user to configure the ESS sound chip with a base address, a DMA channel, an IRQ channel, and an address for the MPU-401 port, if a wavetable is supported by the sound card.

ESSVOL.EXE allows the user to configure the output volume level of the mixer in the sound chip.

Plug & Play O/S: Yes

1. Type ESSCFG [Enter].  This will display the current setting and selected menu to change the desire setting.

2. ESSCFG /? [Enter].  For help.

3. Type ESSVOL [Enter]. Display selected menu to change the desire setting.

4. ESSVOL /? [Enter].  For help.

Typical parameters are:
Address: 220
DMA: 1
IRQ: 5
MPU-401: 300

When finish, hit ESC and prompt will ask to save to config.sys and autoexec.bat [YN]


Plug & Play O/S: NO

1. Type ESSCFG [Enter].  This will display the current setting.

2. Type ESSCFG !  This will allow changing the setting.

3. Type ESSVOL [Enter]. Display current volume setting.

4. Type ESSVOL /? [Enter].  For help.

5. Type ESSVOL /(character).  This will allow changing the setting.

Typical parameters are:
Address: 220
DMA: 1
IRQ: 5
MPU-401: 300

When finish, hit ESC and prompt will ask to save to config.sys and autoexec.bat [YN]