https://ps1stuff.wordpress.com/2016/01/14/floppy-replacement/ Fri, 25 Nov 2016 16:54:06 +0000 hourly 1 http://wordpress.com/ https://ps1stuff.wordpress.com/2016/01/14/floppy-replacement/comment-page-1/#comment-27 Mon, 03 Oct 2016 11:22:50 +0000 http://ps1stuff.wordpress.com/?p=253#comment-27 Unfortunately I’m not the author of this guide and I’ve never personally tested the procedure. Also it’s specific to the PS/1 (although PS/1s and PS/2s use the same parts)
It is possible that the particular model of floppy drive you’re are using is not fully compatible; can you try with another brand/model?
You can also try to ask at the vcfed.org forums, there’s some really expert and helpful guys over there.

]]> https://ps1stuff.wordpress.com/2016/01/14/floppy-replacement/comment-page-1/#comment-26 Mon, 03 Oct 2016 06:26:53 +0000 http://ps1stuff.wordpress.com/?p=253#comment-26 Hey, I did the same process for my ps/2 35 sx that has the same type of drive but im getting stuck on the part where you ground pin 4, it actually makes it so it keeps the error and wont boot off the drive at all anymore. with out this hack i can’t boot the setup disk… any help would be appreciated!

]]> https://ps1stuff.wordpress.com/2016/01/14/floppy-replacement/comment-page-1/#comment-15 Thu, 21 Jan 2016 20:30:27 +0000 http://ps1stuff.wordpress.com/?p=253#comment-15 hey, thanks you very much, not only for this guide (i wish you could provide many more :D) but also for your emulator,
i’ve downloaded it and start testing it

]]>