Ether16 LAN Card Setup for Novell NetWare OS/2 ODI Workstations ----------------------------------------------------------------- Contents: Before You Begin Setup Technical Support -------------------------------------------------------------------------- BEFORE YOU BEGIN -------------------------------------------------------------------------- If your computer does NOT have a plug-and-play motherboard, the following notes apply to you: 1. Before attempting to install the Ether16 LAN Card's network software drivers, you MUST configure the card's internal settings with the SETUP program included on Ether16 disk 1 under the UTILITY directory. Use the program to set the card's interrupt (IRQ) and I/O settings. For directions on using SETUP, see your Ether16 user guide. 2. Most network software packages like Windows 95, Windows NT, Novell NetWare, etc., include a "generic" network driver that will work with a wide range of network cards. This generic driver is called a "Novell NE2000" compatible driver, and it is fully supported by the Ether16 card. If your network software package asks you to choose the name of the network card you're installing from a list of available adapters, and you find "NE2000" or "Novell NE2000" listed, you don't need to follow the directions below---simply choose to install the NE2000 driver and the Ether16 Card will be ready for use. THE ETHER16 IS ONLY NE2000 COMPATIBLE WHEN THE CARD'S PLUG-AND-PLAY MODE IS TURNED OFF. If your PC has a plug-and-play motherboard, and you wish to use the generic NE2000 driver, you must run the Ether16 SETUP program and turn the card's plug-and-play mode off. Setup ----------------------------------------------------------------- If you have already installed OS/2 Warp and NetWare, skip to the ALREADY INSTALLED section below. IF INSTALLING FROM A CD-ROM FOR THE FIRST TIME (NETWARE NOT INSTALLED) Run the NetWare Client for OS/2 program. Follow the instructions on the screen.  Click "Installation" and select "Requester on workstation...".  Specify the target path for install Requester files and the source path that include the Requester files. Ex. D:\NETWARE ; D is target drive E ; CD ROM drive  Accept the default of "Edit CONFIG.SYS and Copy All Files..." in Requester Installation window.  Specify the ODI for OS/2 driver in Step 1 - Choose the ODI LAN Driver window. Ex. ETHER.SYS  Select "Global NetWare Shell Support" in Step 2 - Choose NetWare Support for DOS and Windows Applications window. . Please reference Help for detail.  Following screen's instruction and accept the default of install message.  Click "Cancel" in Copy ODI LAN Driver Files windows.  Put Ether16 disk 1 into the floppy drive.  Open another OS/2 window and copy the ODI for OS/2 drivers from the NDIS\OS2 directory of the Ether16 disk 1 to the NetWare Client's OS/2 target path. For example: >COPY A:\NETWARE\ODI.OS2\ETHER.SYS D:\NETWARE >COPY A:\NETWARE\ODI.OS2\NET.CFG D:\NETWARE  Return to NetWare Workstation for OS/2 Installation Utility window.  Click "Configuration" and select "This workstation...".  Specify the full target path of NET.CFG file and Edit. Ex. D:\NETWARE\NET.CFG Contents of NET.CFG ------------------- Link Driver ETHER Frame Ethernet_802.3 Netware Requester default login drive F  Make any other changes to the NET.CFG file as necessary. When you're finished, click on Save.  Reboot your system.  Click "NetWare Tools" to login NetWare server in Novell window. The setup is complete. IF NETWARE IS ALREADY INSTALLED...  Open an OS/2 window and copy the files from the NDIS\OS2 directory of Ether16 disk 1 to the NetWare Client for OS/2 client directory. Example: >COPY A:\NETWARE\CLIENT\ODI.OS2\ETHER.SYS D:\NETWARE >COPY A:\NETWARE\CLIENT\ODI.OS2\NET.CFG D:\NETWARE  Run the INSTALL.EXE program in the Client for OS/2 target path. Ex. >CD D:\NETWARE ; D is target drive >INSTALL.EXE ; ; NETWARE is default path  Click "Installation" and select "Requester on workstation...".  Specify the target path for install Requester files and the source path that includes the Requester files. Ex. D:\NETWARE ; D is target drive  Select "Only Edit CONFIG.SYS..." in Requester Installation window.  Specify the ODI for OS/2 driver in Step 1 - Choose the ODI LAN Driver window and click "Continue". Ex. ETHER.SYS  Select "Global NetWare Shell Support" in Step 2 - Choose NetWare Support for DOS and Windows Applications window. . Please reference Help for detail.  Follow the screen's instructions and accept the default of install message.  Return to the NetWare Workstation for OS/2 Installation Utility window.  Click "Configuration" and select "This workstation...".  Specify the full target path of NET.CFG file and Edit. Ex. D:\NETWARE\NET.CFG Content of NET.CFG ------------------ Link Driver ETHER Frame Ethernet_802.3 Netware Requester default login drive F  Edit the NET.CFG file as needed. When you're done, click Save.  Reboot your system and allow the chnages to take effect.  Click "NetWare Tools" to login NetWare server in Novell window. The setup is complete. HOW TO GET TECHNICAL SUPPORT ------------------------------------------------------------------------ There are a variety of methods that you can use to get FREE technical help or sales information about Linksys products. Support Hotline (949) 261-1288 Fax (949) 261-8868 BBS (949) 261-2888 (8-N-1) E-mail support@linksys.com World Wide Web http://www.linksys.com