Safety Instructions

                   Power    |    Installation    |    Clean    |    Other   


When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode.
 
  • If the size of your monitor is small, or if the same image is present for long periods of time, you may see afterimages due to damage to the flourescent substance on the inside of the CDT.


    Do not use a damaged or loose plug.
    • This may cause an electric shock or fire.


    Do not pull the plug out by the wire nor touch the plug with wet hands.
    • This may cause an electric shock or fire.


    Use only a properly grounded plug and recepticle.
    • An improper ground may cause electric shock or equipment damage.


    Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
    • Failure to do so may cause an electric shock or fire.


    Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time.
    • Failure to do so may cause an electric shock or fire.


    Do not connect too many extension cords or plugs to an outlet.
    • This may cause a fire.