Setup
                   Connecting Your Monitor  |  Installing the Video Driver  |  Base Installation


  1. Connect the power cord for your monitor to the power port on the back of the monitor.
    Plug the power cord for the monitor into a nearby outlet.
  1. Connect the end of the signal cable to your computer's video port(video board, video card or graphics card).
  1. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter.
Note: Turn on your computer and monitor. If your monitor displays an image, installation is complete.