OPL3-SAx Driver Installation for Win95/98.

DISCLAIMER INFORMATION:

NOTE: The driver(s) MAY NOT BE APPROVED by the manufacturer of your sound card 
or PC system, and that they MAY NOT WORK with your specific sound card or PC 
system configuration.  Use of these driver(s) should be done at the risk of the users 
and we cannot be held responsible for anything caused by using them.

Prior to installing the driver for the OPL3-SAx, you should have already created a folder
in your hard disk drive and downloaded the executable file in that new folder as instructed
by our web page. If not, we highly recommend that you follow all the steps for downloading.  

Please note that Windows will be restarted so we highly recommend that you exit out of
any applications that you may have opened and save any files before going forward.
It is a good practice to back-up your files before any installation.

If you are ready, let's begin.

For the Advance User:

1) Go to the folder, in your hard disk drive, where you downloaded the executable file.
2) Double click on "Setup.exe"and follow all Pop Up window instructions.

Detailed step-by-step instructions:

1) Go to the Task Bar and click on "Start"
2) Click on "Programs"
3) Click on "Windows Explorer"
4) Locate the folder where you downloaded the executable file and open it.
5) Double Click on the folder called "Disk 1"
6) Locate and double click on "Setup.exe."  Setup.exe will restart your computer so 
   please make sure you exit all open application and save any files that you were 
   working on.
7) The "Welcome" box will appear. Read the entire message and follow the instruction.
9) Click "Next"
10) At the "Setup Complete" dialogue box, read the entire message. Click "Yes..." 
   on the Restart Windows. Click "Finish" for Windows to Restart the computer.

This will restart your computer. Windows will detect the hardware and automatically 
install the new driver.

Verifying the Installation of the driver:

1) Click "Start" from the Task Bar
2) Click on "Settings"
3) Click on "Control Panel"
4) On the Control Panel Window, locate and double click on the "OPL3-SAx Config" 
   icon
5) On the OPL3-SAx Configuration Window, locate and click on the button called 
   "About..."
6) On the YAMAHA OPL3-SAx Configuration Window, read the version number. 
   If the last 4 digits of the version number match the executable file you downloaded,
   then the mew driver was successfully installed.