----------------------------------------------------------------
        Instructions for installing for the FireWire/1394 Storage System
        ----------------------------------------------------------------

Your FireWire/1394 Storage System has been designed to be easy to use and install.
This guide has been provided to help you correctly install the necessary drivers.

  ***************************************************************************
  *  1. Make sure that the IDE/ATAPI device is setting in the Master mode.  *
  *  2. External power supply is required if bus power is not enough to     *
  *     support the device.                                                 *
  ***************************************************************************

1. PC USERS

    Your FireWire/1394 Storage System is compatible with any PC running Windows
    98SE/ME and Windows 2000/XP that has a FireWire/1394 port. It installs with
    the normal Plug and Play process:

    1) Make sure that the FireWire/1394 Storage System is plugged into a wall
       outlet and is powered up.
    2) Plug the FireWire/1394 cable into the PC.
    3) Windows will find the new hardware and will give drive Icon automatically.
       No other drivers are required.

       The drivers are now loaded. If the storage device in your FireWire/1394
       Storage System is a hard disk, you must now partition and format the drive.
       This is done through the use of the DOS utility FDISK. See your Windows
       documentation if you are unfamiliar with FDISK. Note that you must run FDISK
       before you try to format the drive and that you must run FDISK in a DOS
       window while Windows is running.

       If you have a problem in plug and unplug with Windows 98SE, you must
       download the patch file from Microsoft Website to solve this problem.

       http://www.microsoft.com/Windows98/downloads/contents/WURecommended
             /S_WUFeatured/1394/Default.asp



2. Macintosh Users

    Your FireWire/1394 Storage System is compatible with any Mac running at least
    Mac OS 8 & above and having a FireWire/1394 port. Here is how you install the
    drivers:

    1) Place the CD-ROM you received with the FireWire/1394 Storage System
       in your CD-ROM drive. There are few drivers in the CD, G:\Deltron\1394\MACOS.
       (G:\ is the letter of your CD-ROM driver)
    2) Drag and drop following files into "SystemFolder:Extensions".
    3) Files required for MacOS 8.x to 9.x are "FWSBP2DiskDriver" driver. "FireWire
       Enabler" and "FireWire Support" are also included. If both files are not
       pre-installed by MacOS, simply drag both files into "SystemFolder:Extensions"
       as well. If both files are already installed, do not install them.
    4) Reboot the computer.
    5) When the computer is rebooted, power up the FireWire/1394 Storage System and
       connect a FireWire/1394 cable between the FireWire/1394 Storage System and the
       computer.
    6) If everything is installed correctly, you will see a new icon on the desktop
       that corresponds to the FireWire/1394 Storage System.

    The drives for your FireWire/1394 Storage System are now installed. You now need
    to initialize the media in the drive. To format your media:

    1) Highlight the icon for the FireWire/1394 Storage System.
    2) From the Finder menu located at the top of the screen, select Special, Erase
       Disk. You can select either DOS or Macintosh formatting. If you intend to
       use the device on both a PC and a Mac, select DOS formatting.