HP SCANJET SCANNERS AND MICROSOFT Ž WINDOWS 95 DRIVERS - HOW TO INSTALL



<H1>HP SCANJET SCANNERS AND MICROSOFT Ž WINDOWS 95 DRIVERS - HOW TO INSTALL</H1>

<hr align=left width=525>

<p>

The following instructions are for pre-installed, non-Windows 95 scanning software, HP DeskScan II, version 2.2.

<p>

<hr align=center width=525>

The <a href="ftp://ftp.hp.com/pub/scanners/software/sj195en.exe">protected mode driver for Windows 95</a> is available through HP's BBS, CompuServe, <a href="ftp://ftp.hp.com/pub/index.html>Internet</a> and America OnLine.


<hr align=center width=525>

<p>

<H2>HP C2502 CARD (ISA WITHOUT SWITCHES)</H2>

<P>
  
1.	Copy HPSJCLAS.DLL to the Win 95 System directory and SCANJET.INF to the Win 95 INF directory.

<ul>
  
a.	Open MS-DOS prompt by clicking on Start menu - Programs and selecting MS-DOS Prompt.
<p>
b.	Insert the driver diskette in the floppy drive.
<p>
c.	At the MS-DOS prompt copy HPSJCLAS.DLL file from the diskette to the Win 95 system directory. The following assumes that your diskette drive is a: and Win 95 was installed on C:\Windows:
<p>
<center>copy a:\hpsjclas.dll c:\windows\system</center>
<p>                        
d.	At the MS-DOS prompt copy SCANJET.INF file from the diskette to the Win 95 INF directory. The following assumes that your diskette drive is a: and Win 95 was installed on C:\Windows:
<p>
<center>copy a:\scanjet.inf c:\windows\inf</center>
<p>
e. At the MS-DOS prompt type exit to return to windows.

</ul>
     
<p>
     
2.	Use "Add New Hardware" in the Control Panel to add a SCSI controller.

<ul>
<p>
a. Select "No" when Windows 95 asks if you want it to search for new hardware.
<p>
b. Select "SCSI controllers" as the hardware type. Push "Next"
<p>
c. Push the "Have Disk..." button when asked to identify the manufacturer and model for your new hardware. Click "OK" to copy manufacturer files from a:\
<p>
d. Select "Symbios Logic 53C400A (HP Version) SCSI Adapter" as the model for your new hardware. Click "Next".
<p>
e. Windows 95 will display which resources it plans to use for your new hardware. Click "Next" then "Finish".

</ul>

<p>

3. Turn off the computer. If the card is not already physically in the computer, insert it now. Connect the scanner to the card's connector. Make sure the scanner is terminated. Make sure the scanner is turned ON prior to step 4 

<p>

4. Turn on the computer. You will be asked for the disk with the drivers on it. Specify the diskette drive location (usually a:\).

<p>
 
<hr align=center width=400>
          
          <center>NOTE:     If you are not asked for the scanner
                            drivers at bootup (after you log in),
                            and your scanner was turned on before
                            and during boot, go to the System
                            Control Panel.  (Press Start, Settings,
                            Control Panel, then double click on
                            System. Click on the device manager
                            tab.) If there is a yellow exclamation
                            mark next to the "Symbios Logic 53C400A
                            (HP Version) SCSI Adapter" you need to
                            adjust the resources for your card. (See
                            Windows 95 documentation for more
                            information). Click on "Symbios Logic
                            53C400A (HP Version) SCSI Adapter", and
                            the Properties button, select the
                            "Resources" tab to examine possible
                            device conflicts. If the "conflict
                            device list" area shows "No conflicts"
                            try checking the "Use automatic 
                            settings" checkbox. If there is a
                            conflict, adjust the resources. (See
                            Windows 95 documentation.)  When you are
                            done press "OK". If values selected are
                            correct, your scanner should be detected
                            and you will be prompted for the driver
                            diskette.</center>

<hr align=center width=400>

<p>
  
5. Your system will restart automatically.
 
<p>
 
6. Your drivers are now installed. Use "Scanner Test" to test the installation.

<p>  

<hr align=center width=400>
          
<center>NOTE:     SCSI address test is not supported with Windows 95.</center>

<hr align=center width=400>

<p>

<H2>THIRD-PARTY SCSI CARD</H2>

<P>
  
1. Copy HPSJCLAS.DLL to the Win 95 System directory and SCANJET.INF to the Win 95 INF directory

<ul>

a. Open MS-DOS prompt by clicking on Start menu - Programs and selecting MS-DOS Prompt.
<p>
b. Insert the driver diskette in to the floppy drive
<p>
c. At the MS-DOS prompt copy HPSJCLAS.DLL file from the diskette to the Win 95 system directory. The following assumes that your diskette drive is a: and Win 95 was installed to C:\Windows:
<p>    
<center>copy a:\hpsjclas.dll c:\windows\system</center>
<p>
d. At the MS-DOS prompt copy SCANJET.INF file from the diskette to the Win95 INF directory. The following assumes that your diskette drive is a: and Win 95 was installed to C:\Windows:
<p>     
<center>copy a:\scanjet.inf c:\windows\inf</center>

</ul>

<p>            

2. Use the "Device Manager" tab in "System" in the Control Panel to verify that a SCSI controller has already been installed. If not use "Add New Hardware" in the Control Panel to add the SCSI controller you own. If the SCSI controller you own is not listed as a choice in "Add New Hardware," you must contact the SCSI controllers manufacturer to obtain a Windows 95 driver.

<p>            

3. Turn off the computer. If the card is not already physically in
     the computer, insert it now. Connect the scanner to the card's
     connector. Make sure that that the scanner is the last device in
     the SCSI chain and that the scanner is terminated. Make sure the
     scanner is turned ON before step 4.

<p>            
  
4. Turn on the computer. You will be asked for the disk with the
     drivers on it.
<p>
 
<hr align=center width=400>
            
<center>NOTE:     If you are not asked for the scanner
                    drivers at bootup (after you log in),
                    and your scanner was turned on before
                    and during boot, go to the System
                    Control Panel.  (Press Start, Settings,
                    Control Panel, and then double click on
                    System. Click on the device manager
                    tab.) Examine your Device configuration,
                    if there is a yellow exclamation mark
                    next to your SCSI card you might have to
                    adjust your card resources. Please
                    consult Windows 95 documentation, your
                    SCSI card documentation, or your SCSI
                    card manufacturer.</center>

 
<hr align=center width=400>

<p>

5. Reboot your system.
<p>
<center>Your drivers are now installed. Use "Scanner Test" to test the
  installation.</center>

<p>

<hr align=center width=400>
          
<center>NOTE: SCSI address test is not supported with
                    Windows 95.</center>

<hr align=center width=400>

<p>

<H2>HP C2503 CARD (MICROCHANNEL WITHOUT SWITCHES)</H2>

<P>
  
1. Identify what Input/Output (I/O) region your interface card is
     using.  Consult the documentation that came with your computer to
     find out how to do this.

<p>

2. Copy HPSJCLAS.DLL to the Win 95 System directory and SCANJET.INF
     to the Win 95 INF directory.

<ul>
  
a. Open MS-DOS prompt by clicking on Start menu - Programs and
        selecting MS-DOS Prompt.
<p>
b. Insert the driver diskette in to the floppy drive
<p>
c. At the MS-DOS prompt copy HPSJCLAS.DLL file from the diskette
        to the Win 95 system directory. The following assumes that
        your diskette drive is a: and Win 95 was installed to
        C:\Windows:
<p>     
<center>copy a:\hpsjclas.dll c:\windows\system</center>
<p>              
d. At the MS-DOS prompt copy SCANJET.INF file from the diskette
        to the Win 95 INF directory. The following assumes that your
        diskette drive is a: and Win 95 was installed to C:\Windows:
<p>     
<center>copy a:\scanjet.inf c:\windows\inf</center>
<p>
 
</ul>

<p>
             
3. Use "Add New Hardware" in the Control Panel to add your scanner
     and interface card.

<ul>
  
a. Select "No" when Windows 95 asks if you want it to search for
        new hardware.
<p>
b. Select "Other devices" as the hardware type. Push "Next".
<p>
c. ush the "Have Disk..." button when asked to identify the
        manufacturer and model for your new hardware. Click "OK" to
        copy manufacturer files from a:\.
<p>
d. elect "HP ScanJet on C2503" as the model for your new
        hardware. Push "Next".
<p>
e. indows 95 will display which resources it plans to use for
        your new hardware. If those do not match the resources your
        card is set to, do not allow your computer to be shut down.
        Instead, go to the "Device Manager" tab in "System" in the
        Control Panel and modify the resources allocated for the "HP
        ScanJet on C2503" to match the card's settings.

</ul>

<p>

4. Turn off the computer. If the card is not already physically in
     the computer, insert it now. Connect the scanner to the card's
     connector. Turn on the computer.

<p>  

5. Your drivers are now installed. Use "Scanner Test" to test the
     installation.

<p>  

<hr align=center width=400>  
          
<center>NOTE: The SCSI address test is not supported
                    with Windows 95.</center>

<hr align=center width=400>

<p>

<H2>HP C1752/C1753 INTERFACE CARD (ISA OR MICROCHANNEL WITH SWITCHES)</H2>
 
<P>

1. Identify what memory region the switches on your interface card
     are set to. Consult the documentation that came with your scanner
     to find out how to do this.

<p>  

2. Copy HPSJCLAS.DLL to the Win 95 System directory and SCANJET.INF
     to the Win 95 INF directory.

<ul>
  
a. Open MS-DOS prompt by clicking on Start menu - Programs and
        selecting MS-DOS Prompt.
<p>
b. Insert the driver diskette in to the floppy drive
<p>
c. At the MS-DOS prompt copy HPSJCLAS.DLL file from the diskette
        to the Win 95 system directory. The following assumes that
        your diskette drive is a: and Win 95 was installed to
        C:\Windows:
<p>
<center>copy a:\hpsjclas.dll c:\windows\system</center>
<p>
d. At the MS-DOS prompt copy SCANJET.INF file from the diskette
        to the Win 95 INF directory. The following assumes that your
        diskette drive is a: and Win 95 was installed to C:\Windows:
<p>     
<center>copy a:\scanjet.inf c:\windows\inf</center>

</ul>

<p>
              
3. Use "Add New Hardware" in the Control Panel to add your scanner
     and interface card.

<ul>

a. Select "No" when Windows 95 asks if you want it to search for
        new hardware.
<p>
b. Select "Other devices" as the hardware type. Click "Next"
<p>
c. Click the "Have Disk..." button when asked to identify the
        manufacturer and model for your new hardware. Click "OK" to
        copy manufacturer files from a:\.
<p>
d. Select "HP ScanJet IIc/IIp on C1752/C1753" as the model for
        your new hardware. Click "Next".
<p>
e. Windows 95 will display which resources it plans to use for
        your new hardware. If those do not match the resources your
        card is set to, do not allow your computer to be shut down.
        Instead, go to the "Device Manager" tab in "System" in the
        Control Panel and modify the resources allocated for the "HP
        ScanJet IIc/IIp on C1752/CI753" to match the card's settings.

</ul>

<p>     

4. Turn off the computer. If the card is not already physically in
     the computer, insert it now. Connect the scanner to the card's
     connector. Turn on the computer.

<p>  

5. Your drivers are now installed. Use "Scanner Test" to test the
     installation.

<p>

<hr align=center width=400>  

<center>NOTE:     The SCSI address test is not supported
                    with Windows 95.</center>

<hr align=center width=400>  

<p>

<H2>HP SCANJET PLUS SCANNER AND INTERFACE CARD</H2>

<P>  

1. Identify what memory region and interrupt the switches and
     jumpers on your interface card are set to. Consult the
     documentation that came with your scanner to find out how to do
     this.

<p>

2. Copy HPSJCLAS.DLL to the Win 95 System directory and SCANJET.INF
     to the Win 95 INF directory.

<ul>    

a. Open MS-DOS prompt by clicking on Start menu - Programs and
        selecting MS-DOS Prompt.
<p>
b. Insert the driver diskette in to the floppy drive
<p>
c. At the MS-DOS prompt copy HPSJCLAS.DLL file from the diskette
       to the Win 95 system directory. The following assumes that
        your diskette drive is a: and Win 95 was installed to
        C:\Windows:
<p>     
<center>copy a:\hpsjclas.dll c:\windows\system</center>
<p>           
d. At the MS-DOS prompt copy SCANJET.INF file from the diskette
        to the Win 95 INF directory. The following assumes that your
        diskette drive is a: and Win 95 was installed to C:\Windows:
<p>  
<center>copy a:\scanjet.inf c:\windows\inf</center>

</ul>          

<p>  

3. Use "Add New Hardware" in the Control Panel to add your scanner
     and interface card.

<ul>

a. Select "No" when Windows 95 asks if you want it to search for
        new hardware.
<p>
b. Select "Other devices" as the hardware type.  Click "Next".
<p>
c. Click the "Have Disk...." button when asked to identify the
        manufacturer and model for your new hardware. Click "OK" to
        copy manufacturer files from a:\.
<p>
d. elect "HP ScanJet-Plus" as the model for your new hardware.
        Click "Next".
<p>
e. indows 95 will display which resources it plans to use for
        your new hardware. If those do not match the resources your
        card is set to, do not allow your computer to be shut down.
        Instead, go to the "Device Manager" tab in "System" in the
        Control Panel and modify the resources allocated for the "HP
        ScanJet Plus" to match the card's settings.

</ul>          

<p>

4. Turn off the computer. If the card is not already physically in
     the computer, insert it now. Connect the scanner to the card's
     connector. Turn on the computer.

<p>

5. Your drivers are now installed. Use "Scanner Test" to test the
     installation.
<p>

<hr align=center width=400>            

<center>NOTE:     The SCSI address test is not supported
                    with Windows 95.</center>

<hr align=center width=400>

<hr align=left width=595>


<p>
<pre>     Windows is a U.S. trademark of Microsoft Corp.

 

                Copyright  Hewlett-Packard Co. 1995

 This information is subject to change without notice and

          is provided "as is" with no warranty.

      Hewlett-Packard shall not be liable for any direct,

    indirect, special, incidental or consequential damages

     in connection with the use of this material.<pre>