************************************************************************* XingMPEG Player Version 3.12 Xing Technology Corporation 810 Fiero Lane San Luis Obispo, CA 93401 ************************************************************************* ************************** GETTING STARTED ************************** ************************************************************************* This XingMPEG Player installation is for Windows 95 and Windows NT users. ************************************************************************* Preparing to Install the XingMPEG Player Before installing the XingMPEG Player, make sure the following hardware and software is installed and working: - IBM PC 486/Pentium or compatible computer (a Pentium with at least 8MB of RAM is recommended); - Microsoft Windows95; - a hard disk drive with at least 3MB of free space; - a CD-ROM drive is optional; - a sound card with a Windows wave audio driver is optional. Installing the XingMPEG Player 1 Turn on your computer and start Windows. 2 Choose "Run" from the Windows 95 Start menu; the "Run" dialog appears. 3 Type the path to the XingMPEG Player setup program (e.g., "A:\SETUP" if you have an install disk in your PC's floppy drive "A"), and click the "OK" button; the XingMPEG Player setup program starts. 4 Follow the setup program's on-screen instructions. ************************************************************************* ************************* XingMPEG Support ************************** ************************************************************************* Product updates and general support information are available electronically via: Compuserve: GO XINGSUPPORT Internet: http://www.xingtech.com/ XingBBS: (805) 783-4911 (modem speed=14.4, 8N1) If you need further information, please contact your dealer or the manufacturer of the product with which the XingMPEG Player came bundled.