Release: Windows NT ASC Universal Driver 2.6.2 Last Updated: 9/5/96 Copyright (c) 1994-1996 Advanced System Products, Inc. The AdvanSys Windows NT Universal Driver supports AdvanSys SCSI Adapters for the Windows NT 3.51 and Windows 4.0 Releases. The driver may work under Windows NT 3.50 and earlier releases but operation under these releases is not supported. The WINDOWS.NT directory includes the following files. The latest versions of these files are contained on the AdvanSys FTP and BBS sites. If the date listed in the WINNT.TXT file is more than a few months old, please check the FTP or BBS site for a newer version of the driver. WINNT.TXT Installation Instructions DISK1 Windows NT diskette identification file TXTSETUP.OEM Windows NT desktop installation file OEMSETUP.INF Windows NT new installation file ASC.SYS AdvanSys Windows NT driver Creating the "Windows NT Installation" Diskettes ================================================ Windows NT requires three installation diskettes as well as the AdvanSys driver diskette described below. If you do not have these three Windows NT installation diskettes they can be created from DOS using WINNT.EXE or from Windows NT using WINNT32.EXE. These commands can be found on the Windows NT installation CD. DOS: WINNT.EXE /OX WINDOWS NT: WINNT32.EXE /OX Creating the "Windows NT AdvanSys Driver" Diskette ================================================== To create a driver diskette for installing the AdvanSys Driver to a new or existing Windows NT system, copy all of the Windows NT release files (DISK1, TXTSETUP.OEM, OEMSETUP.INF, ASC.SYS) to the top directory of a DOS formatted floppy diskette. Label the diskette "Windows NT AdvanSys Driver" and also record the driver version number. New Windows NT Installation =========================== At the end of the diskette phase of a new Windows NT installation, you will be asked whether you want to: "Specify Additional Driver". Answer yes by selecting 'S' and list of drivers will be presented. From this list select "Other". When asked to enter a diskette, insert the "Windows NT AdvanSys Driver" diskette. After the AdvanSys driver is found on the diskette, select its name. The driver will then be loaded and will search for an AdvanSys SCSI adapter installed in the system. If an AdvanSys SCSI adapter is found and the driver is successfully loaded, Windows NT will display a message indicating that the driver was loaded. After this message is displayed, press "Enter" to continue the installation. Existing Windows NT installation ================================ Windows NT 3.51: 1. From the "Program Manager - Main" folder select the "Windows NT Setup" icon. 2. Select "Options" and from the Options list select "Add/Remove SCSI Adapters". 3. From the "Select SCSI Adapter Option" use the down arrow to move to the end of the list and select "Other". 4. When prompted, insert the "Windows NT AdvanSys Driver" diskette. The system must be rebooted for the change to take effect. Windows NT 4.0: 1. Open the "My Computer" icon and then its "Control Panel" icon. 2. From the "Control Panel" select the "SCSI Adapters" icon. 3. Select the "Drivers" tab and then from the "Install Driver" window press the "Have Disk" button. 4. When prompted, insert the "Windows NT AdvanSys Driver" diskette. The system must be rebooted for the change to take effect. Determining the AdvanSys Driver Version ======================================= To determine the version number of the AdvanSys Windows NT driver use the "File Manager" to look at the "Properties->Version" of the AdvanSys driver file \XXX\system32\drivers\asc.sys. XXX is the directory of the currently running Windows NT system. XXX is typically \WINNT. The "View" options setting must be set to "All Files" to allow "asc.sys" to be visible in the directory "drivers". Supported Adapters ================== The CDB counts below indicate the number of SCSI CDB (Command Descriptor Block) requests that can be stored in the RISC chip cache and board LRAM. A CDB is a single SCSI command. This value can be lowered in the BIOS by changing the 'Host Queue Size' adapter setting. Connectivity Products: ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1) ABP5140 - Bus-Master ISA PnP (16 CDB) (Footnote 1) ABP5142 - Bus-Master ISA PnP with floppy (16 CDB) ABP920 - Bus-Master PCI (16 CDB) ABP930 - Bus-Master PCI (16 CDB) ABP930U - Bus-Master PCI Ultra (16 CDB) ABP960 - Bus-Master PCI MAC/PC (16 CDB) (Footnote 2) ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB) Single Channel Products: ABP542 - Bus-Master ISA with floppy (240 CDB) ABP742 - Bus-Master EISA (240 CDB) ABP842 - Bus-Master VL (240 CDB) ABP940 - Bus-Master PCI (240 CDB) ABP940U - Bus-Master PCI Ultra (240 CDB) ABP970 - Bus-Master PCI MAC/PC (240 CDB) ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB) Dual Channel Products: ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel) ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel) ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel) Footnotes: 1. These boards have been shipped by HP with the 4020i CD-R drive. They have no BIOS so they cannot control a boot device, but they can control secondary devices. 2. This board has been shipped by Iomega with the Jaz Jet drive. AdvanSys Contact Information ============================ Mail: Advanced System Products, Inc. 1150 Ringwood Court San Jose, CA 95131 Operator: 1-408-383-9400 FAX: 1-408-383-9612 Tech Support: 1-800-525-7440/1-408-467-2930 BBS: 1-408-383-9540 (14400,N,8,1) Interactive FAX: 1-408-383-9753 Customer Direct Sales: 1-800-883-1099/1-408-383-5777 Tech Support E-Mail: support@advansys.com FTP Site: ftp.advansys.com (login: anonymous) Web Site: http://www.advansys.com