IBM LAN Server

NIC2000 NDIS 2.01 driver can also be used with the IBM LAN Server (version 2.0,
3.x) environment. IBM LAN Server requires a unique NIF file. This NIF file is
included on the NIC2000 NDIS 2.01 driver diskette.

Follow the steps listed below:

1       Insert the NIC2000 NDIS 2.01 driver diskette into the floppy drive.

2       In IBM LAN Server, select or run the LAPS (LAN Adapter and Protocol
        Support) program. Please refer to the IBM LAN Adapter and Protocol
        Support Configuration Guide for more information on this utility and
        for more details on how to install additional adapters and device
        drivers.

3       From the "IBM LAPS" dialog box, choose the "INSTALL" button to install
        a NIC2000 Network adapter card for the IBM LAN Server environment.
        If the NIC2000 adapter card has already been installed, go to step 6
        below to continue.

4       Specify the drive and path (e.g., "LANSRVR") to the NIC2000 NDIS 2.01
        driver diskette (e.g., "A:\mslanman.dos\drivers\ethernet\nic2000").

5       After installing/copying the appropriate NIF files from the NIC2000
        NDIS 2.01 driver diskette, the "IBM LAPS" dialog box will appear again.

6       From the "IBM LAPS" dialog box, select the "Configure".

7       In the "Configuration" dialog box, choose the "Configure LAN
        transports" (default) option and select "Continue".

8       When the "Configure Workstation" dialog box is displayed, remove the
        current configurations from the "Current Configuration" list box.

9       Choose the "High Performance 16-Bit Ethernet Adapter" from the "Network
        Adapters" list box, by highlighting the entry. Then choose "Add" to add
        the NIC2000 adapter card to the "Current Configuration" list box.

10      Highlight the appropriate protocols in the "Protocols" list box. Then
        choose "Add" to add them to the "Current Configuration" list box.

11      Choose the High Performance 16-Bit Ethernet adapter from the "Current
        Configuration" list box. Then choose "Edit".

12      View the default configuration. If the default configuration is ok,
        choose "OK".

If you need to change the NIC2000 configuration, change the options in
this dialog box. Choose "Range" to display the available settings for
each option. Press [F1] if you need help deciding on a setting.


Please make all modifications necessary to match the settings on the
NIC2000 adapter card.


The installation of the NDIS 2.01 driver for IBM LAN Server is now complete.

Driver Installation For IBM Extended Services 1.0

Follow the steps listed below:

1       Insert the NIC2000 NDIS 2.01 driver diskette into the floppy drive.

2       Display the "Communication Manager" main menu and choose "Advanced".

3       Choose "Configuration".

4       Choose "LAN Adapter and Protocol Support" (LAPS).

5       At the "Options" dialog box, choose "Copy" additional network
        adapter drivers. Then choose "OK".

6       At the "Copy Additional Network Adapter Drivers" dialog box, type
        the path (e.g., "A:"). Then choose "OK".

7       When the "Copy Diskette" dialog box is displayed, choose "OK".

8       When the "Options" dialog box is displayed, choose
        "Configure Workstation". Then choose "OK".

9       When the "Configure Workstation" dialog box is displayed, remove the
        current configurations from the "Current Configuration" list box.

10      Choose the "High Performance 16-Bit Ethernet Adapter" from the
        "Network Adapters" list box, by highlighting the entry. Then choose
        "Add" to add the NIC2000 adapter to "Current Configuration" list box.

11      Highlight the appropriate protocols in the "Protocols" list box.
        Then choose "Add" to add them to the "Current Configuration" list box.

12      Choose the "High Performance 16-Bit Ethernet Adpater" at the
        "Current Configuration" list box. Then choose "Edit".

13      View the default configuration. If the default configuration is ok,
        choose "OK".

Driver Installation For IBM LAN Server 4.0

Follow the steps listed below:

1       choose "MPTS" icon

2       choose "Configure" button

3       configure "LAN adapters and protocols"

4       choose "Other adapters..." button

5       give the driver path="A:\NDIS\IBMLANSR"

6       choose "High Performance 16-Bit Ethernet Adapter" from "Network
        Adapters" menu

7       choose "Edit" button to configure IOBASE & Interrupt(IRQ)

8       Press "OK" button, if configure OK

9       close "Configure" menu by choose "Close" button

10      choose "Install" button on "Multi-Protocol Transport Service" menu

11      set path="A:\NDIS\IBMLANSR" to copy the driver "NIC2000.OS2"

12      choose "Exit" to complete the installation


If you need to change the NIC2000 configuration, change the options in this
dialog box. Choose "Range" to display the available settings for each option.
Press [F1] if you need help deciding on a setting.


Please make all modifications necessary to match the settings on the NIC2000
adapter card.

The installation of the NDIS 2.01 driver for IBM Extended Services 1.0
(LAN Server) is now complete.