Artisoft LANtastic

Support is provided for the Artisoft LANtastic (version 6.0) environment.

Note:
Artisoft LANtastic 6.0 is now based on the NDIS 2.01 specification.

In order to install a driver for LANtastic 6.0, the operating system must be
re-installed. Start from the DOS system prompt. Follow the steps listed below:

1       Insert Disk 1 of LANtastic 6.0 into your floppy drive (e.g., "a"). At
        the DOS prompt type:

                a:\install

        Then press <Enter>. This starts the LANtastic installation process.

2       Artisoft's installation program will then search for Microsoft Windows
        on your system. If Windows is not found, press <Enter> at the message
        to run the install program under DOS and goto step 2.1 to continue.
        Otherwise, if Windows is found, Windows will be started. Goto step 3
        to continue.

        2.1     Some Artisoft initialization messages will appear on the screen.
                Press <Enter> to continue.

        2.2     Select "KEEP all previous LANtastic setup information".

        2.3     Select any additional LANtastic features you wish to install
                (see Artisoft LANtastic Manuals for more information).
                Press <Enter> to continue.

        2.4     Select "NDIS Support for Network Adpaters".

        2.5     Insert the NIC2000 NDIS 2.01 driver diskette (disk 1) into
                the floppy drive and then press <Enter> to continue.

        2.6     Insert the apropriate Artisoft LANtastic 6.0 disk when prompted
                for. Press <Enter> to continue.

        2.7     Select "OK to perform the installation" and press <Enter> to
                continue.

        2.8     Information will appear on the screen, press <Enter> to
                continue.

        2.9     Insert the appropriate Artisoft LANtastic 6.0 disk when
                prompted for. Press <Enter> to continue.

        2.10    You will see the "Installation complete" and "Need to reboot
                your computer" message. Press <Enter> to continue. Remove the
                disk from the floppy drive. Press <Enter> to reboot.

        2.11    Next, you will see some LANtastic configuration messages.

                The installation of the NDIS 2.01 driver for Artisoft LANtastic
                6.0 is now complete.

3       You will see the "Artisoft Install" message. Click "OK" to continue.

4       Select "KEEP all previous LANtastic setup information" and click "OK" to
        continue.

5       Select any additional LANtastic features you wish to install
        (see Artisoft LANtastic Manuals for more information). Click "OK" to
         continue.

6       Select "NDIS Support for Network Adapters" and click "OK" to continue.

7       Insert the NIC2000 NDIS 2.01 driver diskette (disk 1) int othe floppy
        drive and then click "OK" to continue.

8       Insert the apropriate Artisoft LANtastic 6.0 disk when prompted for.
        Click "OK" to continue.

9       Select "OK to perform the installation" and click "OK" to continue.

10      Information will appear on the screen, click "OK" to continue.

11      Insert the appropriate Artisoft LANtastic 6.0 disk when prompted for.
        Click "OK" to continue.

12      You will see the "Installation complete" and "Need to reboot your
        computer" message. Click "OK" to continue. Remove the disk from the
        floppy drive. Click "OK" to reboot.

13      Next, you will see some LANtastic configuration messages.

        The installation of the NDIS 2.01 driver for Artisoft LANtastic 6.0
        is now complete.