Microsoft Windows for Workgroups 3.1

Support is provided for the Microsoft Windows for Workgroups (version 3.1)
environment.

Note:
1) The format and procedure to install the NDIS drivers for Windows for
Workgroups 3.1 is different from that of Windows for Workgroups 3.11.

2) The directory structure provided on the NIC2000 NDIS 2.01 driver diskette
has been setup for automatic OEM installation. The OEM Installation section of
this manual provides more details regarding OEM driver installation. Also,
more information can be found.

Follow the steps listed below:

1       Insert the NIC2000 NDIS 2.01 driver diskette in the floppy drive.

2       From the "Main" group in Windows, select the "Control Panel" icon.

3       In the "Network Settings" dialog box, select the "Adapters" button.
        The "Network Adapters" dialog box should appear.

4       Choose the "Add" button to install the NDIS driver from the NIC2000
        NDIS 2.01 driver diskette.

5       In the list of network adapters, select the "Unlisted or Updated Network
        Adapter". Then enter the path to load the NDIS 2.01 driver (e.g.,"A:\").

7       Select the "High Performance 16-Bit Ethernet Driver" and choose "OK".

8       If the network adapter driver requires additional settings, a "Setup"
        dialog box appears displaying the default settings.


        The dialog box will appear and the default settings will show "IRQ = 3"
        and "Base I/O Port=0x300". Use the "Advanced" button option for
        additional settings such as the I/O PORT Address setting. Make
        any modifications to the settings to correspond with the settings
        on your NIC2000 adapter card.

9       In the "Network Adapters" dialog box, choose the "Close" button. Then

        choose the "OK" button in the "Network Settings" dialog box.

10      Follow the remaining Window instructions. Restart the computer to have
        the driver take effect.

        The installation of the NDIS 2.01 driver for Windows for Workgroups
        is now complete.