Installing The NDIS 3.0 Driver

Installation of NIC2000 NDIS 3.0 driver for specific environment is
described below.

Microsoft Windows NT

Note:
1) The directory structure provided on the NIC2000 NDIS 3.0 driver diskette
   has been setup for automatic OEM installation. Also, more information can
   be found in the Microsoft Windows NT User's Guide.

2) Only x86-based Windows NT platforms are supported.

Follow the steps listed below:

1	Insert the NIC2000 NDIS 3.0 driver diskette into the floppy drive.

2	From the "Control Panel" in the "Windows NT Main" window, double click
	on the "Network" icon to install the NIC2000 adapter card.

3	In the "Network Settings" dialog box, choose "Add Adapter".

4	In the "Add Network Adapter" dialog box, pull down the adapter card list
	menu and select "<Other> Requires disk from manufacturer" from the list
	and continue.

5	In the next window, enter:

		A:\

6	Then, select "NIC2000 Adapter" from the dialog box to install the
	NIC2000 adapter card.

7	In the "NIC2000 Network Card Setup" dialog box, please enter the
	correct I/O port, IRQ values to correspond with what is
	set on the card. If no values are selected, the default values will
	be chosen by the NIC2000 driver.

8	Reboot your system to complete the driver installation process.

For additional information, please refer to your Microsoft Windows NT OS documentation.