CSC AK-47 Windows NT Scsi Miniport Driver
-----------------------------------------

Installation:
-------------

Prepare your AK47 NT driver disk:

To make a Windows NT driver disk you must format a floppy with "AK47SCSI" as the
label. Then copy the entire contents of a:\Winnt onto the newly formatted 
disk.

New NT installation:

1. Start the NT installation by booting from the Microsoft Setup floppy disk.

2. Press Enter when the Welcome to Setup screen appears.

3. On the Setup Method screen, choose Custom Setup by pressing C. (If Express 
   Setup is chosen, the installation program scans for SCSI adapters and 
   will fail to find the AK47 controller.)

4. Press S to skip mass storage device detection. 

5. When a screen displays the SCSI adapters found, choose S to configure 
   additional SCSI adapters.

6. Move the highlight bar to Other and press Enter. 

7. When prompted for Manufacturer-supplied hardware support disk, insert your 
   driver diskette (the one prepared in * Preparing a AK47 Driver 
   Diskette *) and press Enter.

8. The CSC AK47 Miniport driver should be shown highlighted. Press Enter 
   to proceed.

9. NT should now recognize the Miniport driver and the SCSI hardware. Press 
   Enter to continue.

   At this point, simply follow the Microsoft Windows NT installation 
   procedure.


Existing System Installation:


NOTE: Windows NT 4.x uses the Windows 95 user interface, resulting in minor 
changes to the procedure for updating SCSI drivers. Procedures for both NT 4.x
and NT 3.5x are listed.


Windows NT 4.x

1. Boot NT and log on as Administrator.

2. Click the Start button, move to Settings, then to Control Panel, and click.

3. Double-click on SCSI Adapters.

4. Click Add. A list of installed adapters is displayed.

5. Click the Have Disk button.

6. When prompted, insert your AK47 Driver diskette (the one prepared in 
   * Preparing a AK47 Driver Diskette *). For the path to the files, leave 
   a:\ and select OK.

7. On the Select Manufacturer Driver menu, the Miniport driver, CSC AK47
   should be shown highlighted. If it is not highlighted, select it.
   Choose OK.

   At this point, the following message may occur:

8. For the path to the OEM SCSI Adapter files, leave a:\ and select Continue.

9. A System Settings Change message displays "You must restart your computer 
    before the new settings take effect. Do you want to restart your computer 
    now?" Choose OK to restart and reboot NT. If you choose Cancel, remember 
    that you must restart before the new driver is loaded.

10. Rebooting loads your new Miniport driver.


Windows NT 3.5x

1. Boot NT and log on as Administrator.

2. Open the Main window in the Program Manager.

3. Double-click on Windows NT Setup.

4. Choose Options, then choose Add/Remove SCSI Adapters.

5. Then choose Add, and select OK when the Setup Message prompts, "Are you sure
   you want to add a SCSI Adapter?"

6. On the SCSI Adapter list, go to the bottom and choose Other.

7. When prompted, insert your AK47 Driver diskette (the one prepared in 
   * Preparing a AK47 Driver Diskette *). For the path to the files, leave 
   a:\ and select OK.

8. On the Select OEM Option menu, the Miniport driver, CSC AK47 
   should be shown highlighted. If it is not highlighted, select it. 
   Choose OK.

9. On the Select SCSI Adapter Option menu, choose Install with the CSC AK47 
   driver highlighted.

10. For the path to the OEM SCSI Adapter files, leave a:\ and select Continue.

11. On the SCSI Adapter Setup menu, choose Close.

12. Rebooting loads your new Miniport driver.



Registry Options:
-----------------

Under NT, The following registry keys affect the operation of the 
CSCAK47.SYS driver:

\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\
CscAk47\Parameters\Device

InitiatorTargetId REG_DWORD (0..7)
DriverParameter REG_PSZ

DriverParameter is a string of options separated by spaces.  The following 
values can be set:

maxtransfer=nnnnnnnn	; Maximum transfer size.  Lower values make the 
			mouse more responsive.  the default is 0x10000
			making this value smaller than 4096 will cause 
			NT to run at a snail's pace
reasonable values:
AK47 ISA 		0x8000
AK47 VLB		0x8000-0x10000

disconnect	;enables disconnect
irq=nn		;override for irq number.  required if no bios.


------------------------
Corporate Systems Center
1294 Hammerwood Ave
Sunnyvale CA 94089
408-734-3475