#
        | README file for
        |
        | ELSA tools to switch between CRT and TV as output device
        | with an ELSA ERAZOR III
        | (ER3-CRT.COM and ER3_TV.COM version 1.00)
        |
        | (c) 1999 ELSA AG (Aachen, Germany)
        | All Rights Reserved.
        |
        | ELSA AG                    Internet   : http://www.elsa.de
        | Sonnenweg 11               LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen
        |
        | ELSA Inc.                  Internet   : http://www.elsa.com
        | 2231 Calle De Luna
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.             Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5
        | Nanking East Road
        | Taipei 105
        | Taiwan, R. O. C.
        |
        | ELSA Japan Inc.            Internet   : http://www.elsa.com
        | Mita Suzuki Building 3F
        | 5-20-14 Shiba, Minato-ku
        | Tokyo 108-0014
        | Japan
        |
        | 06/16/99, BPanning


        Table Of Contents

        1.      Overview
        2.      Disk/CD Contents
        3.      Usage Notes
        4.      Release Notes
        5.      Notes & Warnings (!)
        6.      Bugfixes & Changes

------------------------------------------------------------------------

1.      Overview

        ER3_TV.COM and ER3_CRT.COM are a utilitys to define the standard
        output device on the ELSA ERAZOR III during the running DOS session.


---------------------------------------------------------------------

2.      Disk/CD Contents

        The program disk/CD contains the following files:

        ER3_CRT.COM     the executable program
        ER3_TV.COM      the executable program

        README.TXT      this text file, including notes on the
                        current program release

        LIESMICH.TXT    German version of the text you are currently
                        reading

---------------------------------------------------------------------

3.      Usage Notes

        Use the programs ER3_CRT.COM and ER3_TV.COM only, if a matching
        output device is connected to the ELSA ERAZOR III. This tools
        do not check the availability of the output devices you are
        selecting. Otherwise you will see not output on your display.

---------------------------------------------------------------------

4.      Release Notes

4.1     Supported graphics boards

          ELSA ERAZOR III


---------------------------------------------------------------------

5.      Notes & Warnings

        The settings done with this tools last only during the running
        DOS session. A warm- or cold boot will reset your settings.

--------------------------------------------------------------------

6       Bugfixes & Changes

        none