Can the ELSA 3D REVELATOR also be used with a TFT monitor?

At the selected resolution, the monitor must reach a refresh rate of at least 100 Hz (120 Hz is better), as the 3D glasses cut the actual refresh rate in half and a 3D effect isn't visible at rates of less than 60 Hz. Flat (LCD) screens are not suitable for the display of stereo modes since they generally can only display a maximum refresh rate of 75 Hz. The 3D effect is lost in the event of a display error.

For technical reasons the entire picture—i.e. all of the pixels—is refreshed at once on TFT monitors. This display technology makes do with the lowest refresh rates and cannot achieve the refresh rates required for stereo display. A flicker-free, sharp image for stereo operation thus cannot be achieved using an LCD monitor.

A DFP (digital flat panel) monitor is also unsuitable for the Stereoview. In addition to the reason described above, the connection for the ELSA 3D REVELATOR is also missing.