The automatic setup on the ELSA 3D REVELATOR CD does not recognize the installed graphics board. How can I activate the stereo driver?

Drivers for the ELSA ERAZOR III, ELSA Synergy II and ELSA WINNER II are not yet included on version A-99 of the 3D REVELATOR CD. Please cancel the automatic installation and use the following installation method:
First, install a current driver for the ELSA ERAZOR III or ELSA WINNER II. The current graphics board drivers for Windows 9x for the ELSA VICTORY II, ELSA WINNER II, ELSA ERAZOR II, ELSA Synergy II and ELSA ERAZOR III available on the Web already contain the appropriate stereo driver. Stereo is not automatically enabled, however. Simply install the Stereo3D Viewer manually. The ST3DVIEW folder of the 3D REVELATOR CD contains the file ELSAREVEL.INF (setup information). Right-click on this file and select the third menu item, 'Install'. Installing the Stereo3D Viewer also enables the support for the ELSA 3D REVELATOR glasses in the graphics board driver.

The current version of the Stereo3D Viewer, including the corresponding INF file, can also be found on the ELSA Web site under http://www.elsa.com/DOWNLOAD/FILES/GRAPHICS/REVELATR/INDEX.HTM

The ELSA ERAZOR III and ELSA Synergy II are supported as of version B-99 of the 3D REVELATOR CD. The ELSA WINNER II is supported as of version B-99 of the 3D REVELATOR CD.