Network Everywhere Fast Ethernet NDIS 2 MAC
            Driver Installation for LAN MANAGER DOS 2.x
         ================================================

         Copyright (c) 1996-1998 by Network Everywhere 
         All rights reserved.

The driver you need are in the directories NDIS2DOS.  The NDIS drivers 
contained in these subdirectories are used with 3Com 3+Open, Microsoft 
OS/2 LAN Manager OEM distribution, Release 1.x or 2.x, and other compatible 
OEM versions of LAN Manager.  The driver can also used with IBM LAN Server 
3.0, 4.0, Microsoft Windows for Workgroups v3.11.

The drivers named NCNDIS conform to the Network Driver
Interface Specification (NDIS) defined by Microsoft/3Com.

Included in NDIS2DOS directory are the following files:

\NDIS2DOS

    NCNDIS.DOS          The DOS NDIS MAC driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file
    NCNDIS.NIF          Network Information File

\NDIS2DOS

    BANYAN.TXT          This Installation guide for BANYAN NETWORK.

    NDIS.TXT            This readme file for NDIS 2.0 driver.

    LANMAN.TXT          The Installation guide for LAN Manager.

    LANSVR23.TXT        The Installation guide for Lan Server 3.0

    LANSVR40.TXT        The Installation guide for Lan Server 4.0

    PCNFS.TXT           The Installation guide for PC-NFS

    PATHWORK.TXT        The Installation guide for DEC PATHWORK

Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[NCNDIS_NIF]

 DriverName = NCNDIS$
 ;; Range: 0-7.
 ;; Usage: "Board=nn"
 ;------------------
 ;   Board = 0

 ;; Options: NWAY, TX10, TX10FD, TX100, TX100FD.
 ;; FD -> Full Duplex
 ;; Usage: "MEDIA_TYPE=xxxxx"
 ;-------------------------
 MEDIA_TYPE = NWAY (default value)

There are several parameters included in the NCNDIS_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."

If you change other parameter settings, such as the MEDIA_TYPE, make sure
that it matches the hardware setting.  Otherwise, the adapter may fail.

If you don't specify these settings, MXIC's NDIS 2.0 driver
will automatically detect them.

MEDIA_TYPE  Specifies the line speed for this adapter, default is NWAY.
            NWAY:Speed Auto-Detection, TX100: 100Mbps, TX10: 10Mbps,
            TX100FD: 100Mbps full duplex, TX10FD: 10Mbps full duplex.


-- THE END --