Symptom(s):

• Pocket adapter does not power up using either the AC power adapter or the phantom power cable
• cannot access network

Cause:
Outdated BIOS version on the computer

Solution:
Upgrade the BIOS to build 43096a or later. For details, contact your computer manufacturer.

After upgrading the BIOS, make sure the Parallel port settings are as follows:

LPT1:
I/O 378h
INT 7
EPP/SPP

See the Pocket Adapter User's Guide for information on specifying these settings for the OS/NOS being used.

This applies to:

XircomŪ Pocket 3270 Adapter (P3270) XircomŪ Pocket Arcnet Adapter (PA02B6-8K) XircomŪ Pocket Arcnet II Adapter (PA-2) XircomŪ Pocket Ethernet Adapter (PE10Bx) XircomŪ Pocket Ethernet II Adapter (PE2) XircomŪ Pocket Ethernet III Adapter (PE3-10Bx) XircomŪ Pocket Ethernet Print Server XircomŪ Pocket Ethernet Print Server II XircomŪ Pocket Ethernet+Modem Adapter (PEM-10BT) XircomŪ Pocket EtherTalk Adapter (PET)