SCO UNIX 5.X 2/1/1996 SCO UNIX ISA PnP MDI Driver ================================================== The following files will be used in this installation: Files Contents ----------- ----------------------------------------- Driver.o ISA PnP MDI Driver Program setup Transfer dos format to unix format setup program Master Used by netconfig System Used by netconfig Node Used by netconfig Space.c Used by netconfig space.h Used by netconfig lkcfg Used by netconfig AOF/r2e Used by netconfig 1. Installation Diskette in DOS format. Put ISA PnP SCO UNIX Driver diskette to floppy A: and use doscp command to copy ISA PnP SCO UNIX PCI Driver into UNIX's directories. # cd / # doscp A:setup /setup # chmod +x /setup # ./setup 2. Use netconfig utility Avaiable options: # netconfig 3. To add adapters, select "Add New Lan Adapter" from "Hardware". 4. Add Protocol to select SCO TCP/IP. 5. Enter the internet Address of this interface n.n.n.n 6. Enter the netmask for this interface (default 255.255.255.0) 7. Enter the boardcast address for this interface default: n.n.n.n 8. Do you want to relink to kernel now ? y 9. Do you want this kernel to boot by default (y/n) y 10. Do you want the kernel environment rebuilt (y/n) y 11. Reboot unix # shutdown -y -g0