Windows for Workgroups v3.10

   Introduction:
   -------------
   This document describes the	procedure to  install  Microsoft  Windows
   for Workgroups v3.10 driver	for ISA Plug&Play  ethernet  adapter.  We
   provide two NDIS drivers. The PNPNDIS.DOS/PNPNDIS.OS2 drivers are normal
   drivers and PNPNDT.DOS/PNPNDT.OS2 are turbo NDIS drivers.  It is highly
   recommended to use the turbo drivers to improve network performance.


   Location of Driver:	   \NDIS\PNPNDIS.DOS
   Location of Driver:	   \NDIS\PNPNDT.DOS


   Sample Configuration Files:
   ---------------------------
      AUTOEXEC.BAT
	C:\WINDOWS\NET START
    *** C:\WINDOWS\MSIPX	       (Added if running NetWare)
    *** C:\WINDOWS\NETX 	       (Added if running NetWare)


      CONFIG.SYS (install will add these lines)

	 DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
	 REM	For Normal Driver
	 DEVICE=C:\WINDOWS\PNPNDIS.DOS				   ***

	 REM	or For Turbo Driver
	 DEVICE=C:\WINDOWS\PNPNDT.DOS				   ***

    ***  DEVICE=C:\WINDOWS\MSIPX.SYS   (Added if running NetWare)
	 DEVICE=C:\WINDOWS\WORKGRP.SYS
	 LASTDRIVE=P


      PROTOCOL.INI (install creates this file)	(For normal driver)

	[network.setup]
	version=0x3100
	netcard=ISAPNP,1,ISAPNP 				   ***
	transport=ms$netbeui,MS$NETBEUI
   ***	transport=ms$ipx,MS$IPX        (Added if running NetWare)
	lana0=ISAPNP,1,ms$netbeui				   ***
   ***	lana0=ISAPNP,1,ms$ipx	       (Added if running NetWare)  ***

	[protman]
	DriverName=PROTMAN$
	PRIORITY=MS$NETBEUI

	[ISAPNP]						   ***
	DriverName=PNPNDIS$					   ***
	Adapters=ISAPNP 					   ***
	AdapterID=@0000B4123456

	[MS$NETBEUI]
	DriverName=netbeui$
	SESSIONS=10
	NCBS=32
	BINDINGS=ISAPNP 					   ***
	LANABASE=0

   ***	[MS$IPX]		       (Added if running NetWare)
   ***	Drivername=IPX$ 	       (Added if running NetWare)
   ***	MediaType=Novell/Ethernet      (Added if running NetWare)
   ***	Bindings=ISAPNP 	       (Added if running NetWare)  ***


      PROTOCOL.INI (install creates this file)	(For turbo driver)

	[network.setup]
	version=0x3100
	netcard=ISAPNPT,1,ISAPNPT				   ***
	transport=ms$netbeui,MS$NETBEUI
   ***	transport=ms$ipx,MS$IPX        (Added if running NetWare)
	lana0=ISAPNPT,1,ms$netbeui				   ***
   ***	lana0=ISAPNPT,1,ms$ipx	       (Added if running NetWare)  ***

	[protman]
	DriverName=PROTMAN$
	PRIORITY=MS$NETBEUI

	[ISAPNPT]						   ***
	DriverName=PNPNDT$					   ***
	Adapters=ISAPNPT					   ***
	AdapterID=@0000B4123456

	[MS$NETBEUI]
	DriverName=netbeui$
	SESSIONS=10
	NCBS=32
	BINDINGS=ISAPNPT	       (For turbo driver)	   ***
	LANABASE=0

   ***	[MS$IPX]		       (Added if running NetWare)
   ***	Drivername=IPX$ 	       (Added if running NetWare)
   ***	MediaType=Novell/Ethernet      (Added if running NetWare)
   ***	Bindings=ISAPNPT	       (Added if running NetWare)  ***


      New Windows for Workgroups Installation:
      ----------------------------------------

      1. When installing Windows for Workgroups, you are prompted for a
	 network driver.  Select the "Unlisted or Updated Network Driver".

      2. Insert the ethernet adapter driver disk containing OEMSETUP.INF
	 and PNPNDIS.DOS/PNPNDT.DOS (for turbo driver) files.

      3. Specify the directory for the driver (A:\WFW31) and select the
	 ISA PNP Adapter driver.

      4. Select Advanced options, and make sure the parameters match the
	 card settings.  Check keyword "AdapterID" which is provided by
	 PNPNDIS.DOS/PNPNDT.DOS.  The installation program copies the
	 necessary files and creates PROTOCOL.INI for use with the adapter.

      5. Continue the installation per Windows for Workgroups instructions.


      Existing Windows for Workgroups Installation:

      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Adapters" button.

      4. Select the Add option.

      5. Select "Unlisted or Updated Network Adapter"

      6. Insert the adapter driver disk with OEMSETUP.INF and PNPNDIS.DOS/
	 PNPNDT.DOS and specify the path A:\WFW31.

      7. Select the ISA PNP adapter driver.

      8. The installation program copies the necessary files and
	 creates PROTOCOL.INI for use with the adapter.

      9. Select "Close" and when prompted, restart computer for changes to
	 take effect and complete the installation.


      NOTE:  You must have a terminated cable attached to the adapter
	     when you start Windows for Workgroups.  If you don't, Windows
	     for Workgroups hangs.

   TO ADD NETWARE:
   ---------------
      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Networks" button.

      4. Select "Novell NetWare" and select the add button.

      5. Select "OK" and close the Network icon.

      6. Select reboot computer and restart Windows.

   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

	 AdapterID : This keyword is provided by PNPNDIS/PNPNDT, and is
		     required when  more  than	one  ISA PNP adapters
		     exist on one system.

      2. Installing Multiple LAN Adapters:
	 There are two different method to complete it:
	 (a) Under  DOS  mode, you can modify the AdapterID in file
	     C:\WFW31\PROTOCOL.INI by yourself.

	 (b) Or you can enter Windows for WorkGroup and follow	above
	     setup procedurc step 2,then click on "Setup.." button, select
	     "Advanced...", fill AdapterID in Value item. Last step to
	     select OK and close NETWORK SETUP.