/pub directory -- MAC 1/13/95
=======================================================================

These are the installation instructions for the release of the
Soundscape software version 1.30.03.

First, unzip both of the S2K files in a temporary directory.  They are
self extracting files therefore can be unzip by typing each of their file
names.  After these files are extracted, you will need to run uninstall.
Running uninstall is very important.  Please remember to do so.

After uninstall is complete, run the setup procedure and follow the instructions
on the screen.

========================================================================
Soundscape S-2000 Release Notes

Date: 05/22/95
Version: 1.30.03

-------------------------------------------------------------------------------
Troubleshooting Information
-------------------------------------------------------------------------------
For up-to-date automated troubleshooting assistance, please call Ensoniq's
Fax-on-Demand service at 1-800-257-1439 from a touch-tone telephone.  
This service requires that you have access to a FAX machine.   Please request
document #7255 (Trouble Shooting Manual).

-------------------------------------------------------------------------------
v 1.30.03
-------------------------------------------------------------------------------
**SSInit**
SSInit now correctly handles board not detected errors.  The previous version
of SSInit would write out an incorrect value to the SNDSCAPE.INI file if the
Soundscape base address was not detected. 

**Windows Driver**
This version of the driver now correctly restores the Soundscape DOS 
interrupts after a Windows session.  The previous version of the drivers left 
the Soundscape board programmed with the Windows interrupts after exiting 
Windows.  The net result was that DOS games would not run after a Windows 
session unless the Soundscape board was re-initialized.

-------------------------------------------------------------------------------