Windows 2000 driver installation |
Installation of the Iomega Buz NT drivers in Windows 2000
Here is something
many people asked for: howto install the NT drivers in Windows 2000? It's quite
simple:
1. Right-click my computer
2. Click Properties
3. Go to the hardware tab and select Device Manager
4. Right-click you
Iomega Buz
5. Select Properties
6. Click on the button Re-install Driver
7. Click on Next in the Welcome screen
8. In the windows
that appears now, select the second option (Display a list of the know drivers
for this device so that I can choose a specific driver) and click Next
Picture 1.1: Display a list of the know drivers for this device, so that I can choose a
specific driver.
9. If asked, select
"Sound, video and game controllers" and click Next.
Picture 1.2: Select a hardware type, and then click Next.
10. Click Have Disk.
11. Click Browse
12. Go to the folder where you extracted the driver and double-click
OEMSETUP.INF. Then, click Next
Picture 1.3: Locate File - Select the driver and click Open
13. Select Iomega Buz and click Next
14. Windows gives you a warning. Just ignore this by clicking Yes
15. Windows says the
wizard is ready to install the driver. Click Next.
Picture 1.4: The wizard is ready to install the driver for this device.
16. Windows says that the driver is not digitally signed. Click Yes to proceed with the installation.
Picture 1.5: The driver is not digitally signed
17. The driver askes
you for some settings. (This windows is always in English). Just click Install.
Picture 1.6: Iomega Buz Video Capture NT Driver Installation
18. You can get an
error message. Click OK
Picture 1.7: Error
19. The wizard says it has finished installing the driver. Click Finish.
20. Windows askes
you to reboot the system. Click Yes to do so.
Picture 1.8: Reboot needed