If You Have Problems Using MAKEDISK
===================================

If you have problems creating an DR-DOS diskset with MAKEDISK, please
use the DISKCOPY program in the following way.

For each diskette image file run the DISKCOPY command, specifying 
the filename followed by the destination drive as follows:

	DISKCOPY DISK01.IMG A:
	DISKCOPY DISK02.IMG A: 
	... etc

For DR-DOS Lite you will need three 3.5" 1.44MB diskettes. For
the full product you will need five diskettes.

Label the first diskette "Installation and Utilities 1". Label 
subsequent diskettes "Utilities 2", "Utilities 3" etc.

[Last Updated 02 Mar 99]